Panasonic PV-GS50-K User Manual
12
Quick Guide
1
Charge the Battery.
(
l 18)
≥Connect the AC Cable to the AC Adaptor and plug it into the
AC Wall Outlet.
≥Attach the Battery to the AC Adaptor. (This will start the
charging process.)
≥The [POWER] Lamp and [CHARGE] Lamp light up, and
charging starts. When the [CHARGE] Lamp goes off, charging
is completed.
is completed.
≥Since the Battery will not be charged when the DC Cable is
connected to the AC Adaptor, disconnect it.
2
Attach the Charged Battery to the Palmcorder.
(
l 18)
3
Insert the Cassette.
(
l 20)
≥Slide the [OPEN/EJECT]
1
Lever toward the front and pull
down to open the Cassette Compartment.
≥Insert the Cassette.
≥Press [PUSH CLOSE]
≥Press [PUSH CLOSE]
2
to load the Cassette.
≥Close the outside compartment Cover.
4
Start recording.
(
l 28)
≥Turn the Palmcorder on. (
l 20)
≥Rotate the Switch
3
to [ON]. (The [CAMERA] Lamp lights up.)
≥Press the
4
Button. (Recording starts.)
≥Press the
4
Button again to pause the recording.
To View the Playback Picture
5
Switch to the VCR Mode, rewind the tape, and play
the tape back.
the tape back.
(
l 42)
≥Set the
5
Switch to VCR mode. (The [VCR] Lamp lights up.)
≥Press the
6
Button. (Rewind the tape.)
≥Press the
7
Button. (Playback starts.)
≥Press the
8
Button. (Playback stops.)
6
Turn the Palmcorder off.
(
l 20
≥Set the
9
Switch to [OFF].
1
2
3
4
5, 6
5
9
CLOSE
PUSH
2
1
3
OPEN /
EJECT
EJECT
CAMERA
VCR
CARD
PB
PB
O
FF
ON
MODE
4
8
FADE
7
BACK
LIGHT
6
SEARCH
CAMERA
VCR
CARD
PB
PB
O
FF
ON
MODE
PV-GS50P.book 12 ページ 2003年2月17日 月曜日 午後6時30分