Panasonic PV-GS50-K User Manual
21
3
180
x
4
90
x
3
2
1
O
FF
ON
MODE
1
2
2
1
Using the Viewfinder
Before using the Viewfinder, adjust the field of view so that the
displays inside the Viewfinder become clear and easy to read.
displays inside the Viewfinder become clear and easy to read.
1
Pull the Viewfinder.
2
Adjust the Viewfinder by sliding the Eyepiece
Corrector Knob
Corrector Knob
1
.
Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while
watching it.
watching it.
1
Set the [OFF/ON/MODE] Switch to [ON].
2
Put your finger on the [OPEN
4] Tab
2
on the
underside of the LCD Monitor and pull the LCD
Monitor out about 90
Monitor out about 90
x in the direction of the arrow.
≥The Viewfinder goes off.
3
Adjust the LCD Monitor angle according to the
desired recording angle.
desired recording angle.
≥The LCD Monitor can rotate a maximum of 180x
3
from the
vertical position to the upward direction and a maximum of 90
x
4
to the downward direction. Forcefully rotating the LCD
monitor beyond these ranges will damage the Palmcorder.
Closing the LCD monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ª Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to
[YES], the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
[YES], the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
1
Press the [PUSH] Dial and select the item you want to
adjust.
adjust.
2
Rotate the [PUSH] Dial and increase or decrease the
number of the vertical bars on the Bar Indication.
number of the vertical bars on the Bar Indication.
≥The Bar Indication has 8 steps. A larger number of vertical
bars indicates stronger brightness or color saturation.
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to
[BRIGHT].
≥These adjustments do not affect the recorded images.
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to
[BRIGHT].
≥These adjustments do not affect the recorded images.
≥For other notes, see page 95.
LCD/EVF SET
PUSH MENU TO RETURN
LCD BRIGHTNESS
LOW||||----HIGH
LCD COLOR LEVEL
LOW||||----HIGH
LOW||||----HIGH
EVF BRIGHTNESS
LOW||||----HIGH
LOW||||----HIGH
Before Use
PV-GS50P.book 21 ページ ２００３年２月１７日 月曜日 午後６時３０分