Panasonic PV-GS50-K User Manual
27
CLOCK SET
PUSH MENU TO RETURN
YEAR
:2003
MONTH :OCT
DAY :20
HOUR : 8PM
MINUTE:46
DAY :20
HOUR : 8PM
MINUTE:46
1, 3
1, 2
M E N U
PUSH
MF / VOL / JOG
W.B / SHUTTER / IRIS
1
2
12bit 16bit
REC SPEED
AUDIO REC
12bit
RETURN
---- YES
SP LP
SCENE INDEX 2HOUR
WIND CUT
WIND CUT
OFF
RECORDING SETUP
PUSH MENU TO EXIT
ON
ZOOM MIC
REC SPEED
AUDIO REC
RETURN
---- YES
SP
SCENE INDEX 2HOUR
WIND CUT
WIND CUT
OFF
RECORDING SETUP
PUSH MENU TO EXIT
ON
ZOOM MIC
Setting Date and Time
1
Press the [MENU] Button and rotate the [PUSH] Dial
to select [OTHER FUNCTIONS] >> [CLOCK SET] >>
[YES].
to select [OTHER FUNCTIONS] >> [CLOCK SET] >>
[YES].
2
Rotate and press the [PUSH] Dial to select [YEAR]/
[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to a
desired value.
[MONTH]/[DAY]/[HOUR]/[MINUTE] and set it to a
desired value.
≥Year will cycle in the order shown below.
2000
) 2001 ) ... ) 2089 ) 2000 ) ...
3
Press the [MENU] Button to finish setting the date
and time.
and time.
≥The clock operation starts from [00] seconds.
≥The menu will disappear when the [MENU] Button is pressed
≥The menu will disappear when the [MENU] Button is pressed
again.
≥It is possible that the built-in clock in the Palmcorder may become
inaccurate. Please check the time before recording. If the [
0]
Indication is flashing, charge the built-in lithium battery and reset
the date and time.
the date and time.
~~~~~~~~~~~~~~~~~~~~~~
Internal Lithium Battery Recharge
The internal lithium battery sustains the operation of the clock. When
the [
the [
0] Indication
1
is lit, the internal lithium battery is almost or
already discharged.
1
Connect the AC Adaptor to the Palmcorder with the
power turned off and then connect to the AC Jack.
power turned off and then connect to the AC Jack.
≥After charging for 4 hours, the built-in lithium battery can power
the clock for approximately 3 months.
~~~~~~~~~~~~~~~~~~~~~~
LP Mode
A desired recording speed can be selected with [REC SPEED] on
the [RECORDING SETUP] Sub-Menu.
the [RECORDING SETUP] Sub-Menu.
1
If LP Mode is selected, the recording time becomes 1.5 times
longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode
recording, mosaic-like noise patterns may appear on a playback
image, or some normal functions may be restricted.
≥The contents that are recorded in LP Mode are not completely
longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode
recording, mosaic-like noise patterns may appear on a playback
image, or some normal functions may be restricted.
≥The contents that are recorded in LP Mode are not completely
compatible with other equipment.
≥Audio Dubbing is not possible with LP Mode. (
l 50)
~~~~~~~~~~~~~~~~~~~~~~
Audio Recording Mode
The sound quality of the recorded sound can be selected with
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu.
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu.
2
High sound-quality recording is possible with “16bit 48kHz 2 track”
Mode. With the “12bit 32kHz 4 track” Mode, the original sound can
be recorded on 2 tracks in stereo, while the other 2 tracks can be
used for re-recording.
Mode. With the “12bit 32kHz 4 track” Mode, the original sound can
be recorded on 2 tracks in stereo, while the other 2 tracks can be
used for re-recording.
1
1
Before Use
PV-GS50P.book 27 ページ ２００３年２月１７日 月曜日 午後６時３０分