Panasonic F0707K0 -M User Manual
27
Preparations
Up to four sets of settings can be saved as four
files on the SD memory card, and they can be
loaded from the card.
files on the SD memory card, and they can be
loaded from the card.
1
Press [MODE] to display the thumbnail
display off screen.
2
Select “USER FILE” on the setting menu
“CARD FUNCTIONS” screen, select “YES”,
and press [STILL].
• Basic operations on the setting menus (page
and press [STILL].
• Basic operations on the setting menus (page
70)
CARD FUNCTIONS
SD CARD FORMAT
USER FILE
- - - -
- - - -
3
Using [FF] or [REW], select the file number
(1, 2, 3 or 4).
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
WRITE
FILE 1
FILE 2
FILE 3
FILE 4
FILE 2
FILE 3
FILE 4
- - - -
YES
NO FILE
NO FILE
NO FILE
NO FILE
- - - -
YES
NO FILE
NO FILE
NO FILE
NO FILE
- - - -
TITLE RELOAD
4
Using [STOP] and [PLAY], select “WRITE”,
and press [STILL].
SCENE FILE (SD CARD)
FILE SELECT
READ
WRITE
WRITE
FILE 1
FILE 2
FILE 3
FILE 4
FILE 2
FILE 3
FILE 4
- - - -
YES
NO FILE
NO FILE
NO FILE
NO FILE
- - - -
YES
NO FILE
NO FILE
NO FILE
NO FILE
- - - -
TITLE RELOAD
5
Display “YES” using [REW] and [PLAY], and
press [STILL].
• In the figure below, “TITLE1” is the filename.
• After the data has been saved, “WRITE OK”
• In the figure below, “TITLE1” is the filename.
• After the data has been saved, “WRITE OK”
is displayed.
WRITE FILE 1
YES - - - -
YES - - - -
PUSH STILL
TITLE EDIT
T I T L E 1
T I T L E 1
SCENE FILE (SD CARD)
Saving USER files on SD memory cards
6
Press [MENU] four times to release the
menu mode.
To give titles to files
1) Perform steps 1 to 4.
2) Select the characters using [STOP] and [PLAY],
1) Perform steps 1 to 4.
2) Select the characters using [STOP] and [PLAY],
and move to the next character using [STILL].
• Any of the following characters can be input.
• Any of the following characters can be input.
(Space), A to Z, 0 to 9, : ; < = > ? @ [¥] ^ _
-. /
-. /
• All the characters can be deleted using the
unit’s [RESET] button.
3) After all the characters have been input, press
[FF] at the left end of the characters (or [REW]
at the right end), and press [STILL].
at the right end), and press [STILL].
To re-load files from SD memory cards
1) Performs steps 1 and 2.
2) Move to [READ] using [STOP] and [PLAY],
1) Performs steps 1 and 2.
2) Move to [READ] using [STOP] and [PLAY],
display “YES”, and press [STILL]. The files are
now re-loaded.
now re-loaded.
3) If “TURN POWER OFF” appears after loading,
turn off the power, and then turn it back on. The
loaded files are now set.
loaded files are now set.
• If “WRITE NG FORMAT ERROR” is displayed,
format the SD memory card. (Page 26)
• If “WRITE NG WRITE PROTECT” is displayed,
release the SD memory card protection.
• If “WRITE NG CANNOT ACCESS” is displayed,
complete the other operations (such as
playback), and then proceed to operate.
playback), and then proceed to operate.
• If “WRITE NG ERROR” is displayed, the SD
memory card may be defective. Replace the
card.
card.