Panasonic PV-DV402 User Manual

External Microphone
with M3 connector (not
supplied)

External
Microphone Jack
(PV-DV402 only)

The original sound can be replaced with
new sound using the built-in Palmcorder
microphone or an external microphone
(PV-DV402 only).

Set POWER to VCR.
• With the Remote Control, you can set

the Palmcorder to stop automatically
at a specified point on the tape. See
“Memory-Stop Editing” on page 45.

 (PAUSE) where you  want dubbing to

begin.

Press MENU to display the VCR mode
menu screen.
Rotate JOG KEY to select 

,

then press JOG KEY to display the
VCR REC MODE menu screen.
Rotate JOG KEY to select 

, and then press JOG KEY to

select ON.
• The Palmcorder will go to Stand By

mode, and “A.DUB” flashes in the EVF
or the LCD monitor. Go to step 4.

PLAY

PAUSE

A.DUB

• Connect the external Microphone

(if used) (PV-DV402 only).

• Turn on the Palmcorder.
• Insert a pre-recorded tape to be dubbed.

Built-in Microphone

The AUDIO-REC setting in CAMERA
MENU mode should be as follows:

• Select 12 bit if you do not want the

original sound to be completely replaced
during an audio dub.

• If you dub over a tape which has both

12 bit and 16 bit audio recordings on it,
keep in mind that the original 16 bit audio
portion will be completely replaced.

The original sound is recorded
on ST (Stereo) 1, and the new
sound will be recorded on ST
(Stereo) 2.
The original sound is replaced
with the new sound.

POWER

JOG KEY

MENU

Press A.DUB on the Remote Control.
• The Palmcorder will go to Stand By

mode, and “A.DUB” flashes in the
EVF or the LCD monitor. Go to step 4.

48