Panasonic HC-902M User Manual

Page of 36
11
VQT4R14
∫ About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBN130/VW-VBN260.
≥ The unit has a function for distinguishing batteries which can be used safely. The 
dedicated battery (VW-VBN130/VW-VBN260) supports this function. The only batteries 
suitable for use with this unit are genuine Panasonic products and batteries manufactured 
by other companies and certified by Panasonic. (Batteries which do not support this 
function cannot be used). Panasonic cannot in any way guarantee the quality, 
performance or safety of batteries which have been manufactured by other companies and 
are not genuine Panasonic products.
Inserting/removing the battery
≥ Press the power button to turn off the unit. (
15)
Open the LCD monitor and install the battery by inserting it in the direction 
shown in the figure.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the genuine 
product are made available to purchase in some markets. Some of these battery packs 
are not adequately protected with internal protection to meet the requirements of 
appropriate safety standards. There is a possibility that these battery packs may lead to 
fire or explosion. Please be advised that we are not liable for any accident or failure 
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are 
used we would recommend that a genuine Panasonic battery pack is used.
Removing the battery
Be sure to hold down the power button until 
the status indicator goes off. Then remove 
the battery while supporting the unit to 
prevent it from dropping.
Move the battery release lever in the 
direction indicated by the arrow and 
remove the battery when unlocked.
BATT
A
Insert the battery until it clicks and locks.
B
Battery holder
HC-X920&X920M&X910P&PC&PU_VQT4R14_mst.book  11 ページ  2012年12月27日 木曜日 午前10時44分