Panasonic PV-GS180 User Manual

Page of 84
Others
63
LSQT0973
≥For images not recorded with this Camcorder, 
the size display is determined as follows 
according to the number of horizontal pixels.
:
2048 or more
:
1600 or more, less than 2048
:
1280 or more, less than 1600
:
1024 or more, less than 1280
:
800 or more, less than 1024
:
640 or more, less than 800
(The size is not displayed at 
under 640 pixels.) 
Warning/alarm indications
If any one of the following indications lights up or 
flashes, please check the Camcorder.
Confirmatory indications
Y: A cassette with the accidental erasure 
prevention slider placed in the [SAVE] 
position is inserted.
No cassette is inserted.
[--]/
0:
The built-in battery is low. 
-22-
°: The warning/alarm indication appears when 
you record yourself. Turn the LCD monitor 
towards the viewfinder and check the 
warning/alarm indication.
: No card is inserted.
REMOTE : 
An incorrect remote control mode has been 
selected. 
-25-
2END: 
The tape came to the end during recording.
::  The video heads are dirty. 
-69-
Textual indications
3DEW DETECT/3EJECT TAPE:
Condensation has occurred. Take out the 
cassette and wait for a while. It takes some 
time until the cassette holder opens, but this 
is not a malfunction. 
-68-
LOW BATTERY: 
The battery is low. Recharge it. 
-16-
NO TAPE : 
No tape is inserted. 
-17-
TAPE END: 
The tape came to the end during recording.
CHECK REC TAB: 
You are attempting to record pictures on a 
tape with the accidental erasure prevention 
slider placed in the [SAVE] position. 
You are attempting audio dubbing or digital 
dubbing on a tape with the accidental 
erasure prevention slider placed in the 
[SAVE] position. 
CHECK REMOTE MODE:
An incorrect remote control mode has been 
selected. This is only displayed at the first 
operation of the remote control after 
powering-on. 
-25-
WRONG TAPE FORMAT: 
You are attempting to play back a tape 
section that has been recorded with a 
different TV system. This cassette is 
incompatible.
UNPLAYABLE CARD: 
You are attempting to play back data not 
compatible with this Camcorder.
UNABLE TO A.DUB (LP RECORDED): 
Audio dubbing cannot be performed 
because the original recording was in LP 
mode.
UNABLE TO A.DUB:
You are attempting to perform audio 
dubbing on a non-recorded tape.
COPY PROTECTED: 
Images cannot be recorded correctly 
because the medium is protected by a copy 
guard.
CARD ERROR: 
This card is not compatible with this 
Camcorder.
You are attempting to format a failed card.
It displays, when you attempt to insert an 
incompatible card to Card Slot.
NO CARD: 
No card is inserted.
CARD FULL: 
Card does not have sufficient memory 
remaining. 
Select Picture Playback Mode and delete 
unnecessary files.
NO DATA: 
There are no recorded files on the card.
CANCEL WIDE MODE:
You are attempting to record pictures with 
an aspect ratio of 16:9 by pressing the 
[PHOTO SHOT] button.
FILE LOCKED: 
You are attempting to erase protected files.
CARD LOCKED: 
The write protection switch on the SD 
Memory Card is set to [LOCK].
NEED HEAD CLEANING: 
The video heads are dirty. 
-69-
PUSH THE RESET SWITCH: 
An irregularity in the equipment has been 
detected. Press the [RESET] button (
-13-
). 
This may solve the problem.
QXGA
UXGA
SXGA
XGA
SVGA
640
LSQT0973ENG.book  63 ページ  2006年1月30日 月曜日 午前11時40分