Panasonic PV-GS65 User Manual
Record mode
31
LSQT0860
Tele-macro function
By focusing only on the subject and blurring the
background, the image can be impressive. This
Camcorder can focus on the subject at a distance
of approx. 16 inches (40 cm).
≥Set to Tape/Card Recording Mode.
background, the image can be impressive. This
Camcorder can focus on the subject at a distance
of approx. 16 inches (40 cm).
≥Set to Tape/Card Recording Mode.
1
Press the joystick until the icon
1 appears.
2
Move the joystick up to select the
tele-macro icon [
tele-macro icon [
].
≥If the magnification is 10k or less, then it is
automatically set to 10
k.
ª
To cancel the tele-macro function
Select the [
] icon again.
≥If a sharper focus cannot be achieved, adjust
the focus manually.
≥In the following cases, the tele-macro function is
canceled.
≥The zoom magnification becomes lower than
10
k.
≥The [OFF/ON] switch or the mode dial is
operated.
Fade in/fade out function
Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
1
Press the joystick until the icon
1 appears.
2
Move the joystick left to select the fade icon
[
[
].
3
Press the recording start/stop button.
Start recording. (fade in)
When you start recording, the image/audio
disappears completely and the image/audio
gradually appears.
When you start recording, the image/audio
disappears completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
ª
To cancel fading
Select the [
] icon again.
ª
To select the color for fade in/out
The color which appears in fading pictures can be
selected.
selected.
1
Set [SETUP] >> [FADE COLOR] >> [WHITE]
or [BLACK].
or [BLACK].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.
when you start recording images. Besides, it
also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
microphone when recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction
function
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
1
1
B
LSQT0860ENG.book 31 ページ ２００４年１２月２２日 水曜日 午後２時３８分