Panasonic DMCZS10K User Manual

Page of 150
14   
VQT3G90
VQT3G90
   15
Inserting and removing the card (optional)/
the battery
 (Continued)
 Picture save destination (cards and built-in memory)
 
Built-in memory (approx. 18 MB)
 
Pictures may be copied between cards and the built-in memory. (
 
The access time for the built-in memory may be longer than the access time for a card.
 
Compatible memory cards (optional)
The following SD standard-based cards (Panasonic brand recommended)
Type of Card
Capacity
Notes
SD Memory Cards
8 MB – 2 GB
 
• Using a card of SD speed “Class 4”
 or above is 
recommended for recording motion pictures in 
[AVCHD].
Using a card of SD speed “Class 6”
 or above is 
recommended for recording motion pictures in 
“MOTION JPEG”.
 
• Can be used with devices compatible with the 
respective formats.
 
• Before using SDXC Memory Cards, check that 
your computer and other devices support this type 
of card. 
http://panasonic.net/avc/sdcard/information/SDXC.html
 
• Only the cards listed on the left with the given 
capacities are supported.
SDHC Memory Cards
4 GB – 32 GB
SDXC Memory Cards
48 GB, 64 GB
  SD speed class refers to a specification for sustained write speeds. Confirm the SD speed by 
checking the card label or other card related materials.
(Example)
 
Please reformat the card with this camera if it has already been 
formatted with a computer or another device. (
 
If the write-protect switch is set to “LOCK”, the card cannot be used 
to record or delete pictures, and it cannot be formatted.
 
It is recommended that you copy important pictures to your 
computer (as electromagnetic waves, static electricity, or faults may 
cause data to be damaged).
 
Latest information: 
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
Switch (LOCK)
 Remaining battery and memory capacity
Remaining battery (only when using battery)
(flashes red)
If the battery mark flashes red, recharge or replace battery.
Estimated remaining pictures or recording time capacity (press [DISP.] 
button to switch display)
Displayed when no card is inserted (pictures will be saved to built-in memory)
When in operation
 (Card) or 
 (Built-in memory) are illuminated red.
While the light remains lit, an operation is taking place, such as picture writing, reading, deletion or 
formatting. While the light is lit, do not turn off the power or remove battery, card, AC adaptor (optional) 
or DC coupler (optional), as this can cause data loss or damage. Do not subject the camera to 
vibrations, impact, or static electricity. Should any of these cause camera operation to be terminated, 
attempt to perform the operation again.
Recording capacity guidelines (pictures/recording time)
The number of pictures you can take and the recording time vary in proportion to card 
capacity (and depending on recording conditions and type of card).
 
If you make Web upload settings, the recording picture capacity and the recording time 
capacity of the card may be reduced. (
 
Recording picture capacity (still pictures)
[Picture Size]
Built-in memory
2 GB
4 GB
16 GB
 
14M
2
330
670
2740
 
5M
5
650
1300
5300
 
0.3M
99
10050
19940
81340
 
• When the number of recordable pictures exceeds 99,999, “+99999” is displayed.
 
Recording time capacity (motion pictures)
When the [AVCHD] recording mode is used
Built-in memory
2 GB
4 GB
16 GB
14 min
29 min
2 h 4 min
 
• An AVCHD motion picture can be recorded continuously for up to 29 minutes 59 seconds when 
[GFS] or [FSH] is set. The time displayed in the table is the total time.
When the [Motion JPEG] recording mode is used
[Rec Quality]
Built-in memory
2 GB
4 GB
16 GB
HD
7 min 40 s
15 min 40 s
1 h 6 min
VGA
20 min
41 min
2 h 51 min
QVGA
32 s
55 min 30 s
1 h 53 min
7 h 55 min
 
• A maximum of approx. 2 GB of continuous motion picture can be recorded in [Motion JPEG] 
format. (Even if there is more than 2 GB of available space on the card, the available recording 
time will be calculated for a maximum of 2 GB.) 
The time displayed in the table is the total time.