Panasonic PV-GS34PKG User Manual

Before Using

Re-attaching the Lens Cap

To protect the Lens surface, attach the Lens Cap.
• The Lens Cap and Lens Cap Cord come

preattached to the Grip Belt.

Pass one end of the Lens Cap Cord through

the attached eye on the Lens Cap. Then
pass the Lens Cap through the loop made
by itself and pull tight.

To Use as a Grip Belt

Adjust the length of the Grip Belt to the size of your
hand.

Detach the end of the Grip Belt.

Adjust the length of the Grip Belt to the size

of your hand.

Reattach the Grip Belt.

• When not using the Lens Cap, pull the Lens Cap

Cord in the direction of the arrow.

• When you are not recording, be sure to cover the

Lens with the Lens Cap for protection.

Attaching the Shoulder Strap

We recommend that you attach the Shoulder Strap
before going out to avoid dropping the Camcorder.

Pull the end of the Shoulder Strap

through the Shoulder Strap Holder on the
Camcorder.

Fold the end of the Shoulder Strap, run

it through the Shoulder Strap Length
Adjuster, and pull it.

• Pull it out more than 1 inch (2 cm)

from the

Shoulder Strap Length Adjuster so that it cannot
slip off.

• Attach the other end of the Shoulder Strap to the

other Shoulder Strap Holder in the same way.

Inserting a Cassette

Slide the [OPEN/EJECT] Lever

toward

the front and pull down to fully open the
Cassette Compartment Cover.

• To protect the tape, if the cover is not fully

opened, the cassette holder cannot be ejected.

After the Cassette Holder is opened, insert

a Cassette.

• When you remove the Lens Cap, press the knobs

firmly.

• Please use Genuine Panasonic DVC Tapes for more

information please contact your local dealer or visit
www.panasonic.com.

• For your reference if you travel frequently you should

also purchase a Panasonic head cleaning tape
AY-DVMCLA and use when HEAD CLOG message
appears on the LCD/EVF of your Camcorder.