Panasonic PV-GS35 User Manual

Others

„ After Use

„ Cautions for Use

•  Water may cause the Camcorder or Cassette to 

malfunction. (Irreparable failure may occur.)

•  If sea water splashes onto the Camcorder, wet a 

soft cloth with tap water, wring it well, and use it to 
wipe the camera body carefully. Then, wipe it again 
thoroughly with a soft dry cloth.

•  If you use the Camcorder on or near a TV, images 

or sounds may be disturbed due to electromagnetic 
wave radiation.

•  Do not use near a cell phone because doing so 

may cause noise to adversely affect the picture and 
sound.

•  Recordings on the tape may be damaged, or images 

may be distorted, by strong magnetic fields created 
by speakers or large motors.

•  Electromagnetic wave radiation generated by a 

microprocessor may adversely affect the Camcorder, 
causing the disturbance of images and sounds.

•  If the Camcorder is affected by magnetically charged 

equipment and does not function properly, turn off 
the Camcorder power and detach the Battery or AC 
Adaptor and then connect the Battery or AC Adaptor 
again. Thereafter, turn on the Camcorder power.

•  If you record pictures near radio transmitters or 

high-voltage cables, recorded images or sounds 
may be adversely affected.

•  When playing back a picture recorded on other 

equipment, the picture may not be played back or 
the quality of pictures may be deteriorated.

•  When playing back a non standardized file, the 

Folder File Number may not be displayed.

„ Slide Show

•  Playback time may take longer than usual depending 

on the picture.

„ Deleting the Files Recorded on a Card

•  When [CARD FULL] is shown during recording, 

switch to the Picture Playback Mode and then delete 
unnecessary files.

•  If there are no files to delete, insert a new card.
•  If files conforming to DCF standard are deleted, all 

the data related to the files will be deleted.

„ DPOF

•  DPOF setting made on another camera may not 

be recognized by Camcorder. Perform the DPOF 
Settings on your Camcorder.

•  Verifying the DPOF Settings may take a little time. 

Wait until the Card Access Lamp goes out.

„ Lock Setting

•  The Lock Setting carried out by this Camcorder is 

only effective for this Camcorder.

•  The SD Memory Card has a write protection switch 

on it. If the switch is moved to the [LOCK] side, you 
cannot write to or format the Card. If it is moved 
back, you can.

„ Playing Back on Your TV

•  Whenever plugging in the S-Video cable, plug in the 

AV cable, too.

•  Use the AC adaptor to avoid battery depletion.

„ Recording from a Tape onto a Card

•  If you press the [PHOTO SHOT] Button without 

pausing, blurred pictures may be recorded.

„ Audio Dubbing

•  The blank section of a tape cannot be dubbed.
•  Sounds sent through the DV terminal cannot be 

dubbed.

•  If a tape has a non-recorded portion when the tape 

is dubbed, images and sounds may be disturbed 
when this portion of the tape is played back.

•  In the case of importing data recorded with Audio 

Dubbing to a PC using the PC’s software, only the 
original sound (ST1) may be imported, depending on 
the software.

„ Using the DV Cable for Recording 

•  Do not plug or unplug the DV Cable during dubbing, 

or the dubbing may not be completed properly.

•  Regardless of the menu settings on the recorder, 

digital dubbing is carried out in the same mode as 
the [AUDIO REC] mode of the playback tape.

•  The images on the recorder monitor may be 

disturbed, but it does not affect the recorded images.

•  Even if you use a device equipped with DV 

Terminals such as IEEE1394, you may not be able 
to perform Digital Dubbing in some cases. For more 
information, see the instructions for equipment 
connected.

•  Date or other information to be displayed cannot be 

displayed if the software of the connected equipment 
does not support the display function.