Panasonic GR-DX300 User Manual

EN

During recording, a time code is recorded on the tape.
This code is to confirm the location of the recorded
scene on the tape during playback.
If recording starts from a blank portion, the time code
begins counting from “00:00:00” (minute:second:frame).
If recording starts from the end of a previously recorded
scene, the time code continues from the last time code
number.

To perform Random Assemble Editing (

墌

 pg. 41 – 43),

time code is necessary. If during recording a blank
portion is left partway through the tape, the time code
is interrupted. When recording is resumed, the time
code starts counting up again from “00:00:00”. This
means the camcorder may record the same time codes
as those existing in a previously recorded scene. To
prevent this, perform “RECORDING FROM THE
MIDDLE OF A TAPE” in the following cases;

• When shooting again after playing back a recorded

tape.

• When power shuts off during shooting.
• When a tape is removed and re-inserted during

shooting.

• When shooting using a partially recorded tape.
• When shooting on a blank portion located partway

through the tape.

• When shooting again after shooting a scene then

opening/closing the cassette holder cover.

Play back a tape or use Blank Search (

墌

 pg. 15) to

find the spot at which you want to start recording, then
engage the Still Playback mode (

墌

 pg. 14, “Normal

Playback”).

Set the Power Switch 

@

 to “

” or “

” while

pressing down the Lock Button 

$

 located on the

switch, then start recording.

● The time code cannot be reset.

● During fast-forwarding and rewinding, the time code

indication does not move smoothly.

● The time code is displayed only when “TIME CODE” is

set to “ON” (

墌

 pg. 35).

Load a tape (

墌

 pg. 9).

Set the VIDEO/MEMORY Switch 

t

 to “VIDEO”,

then set the Power Switch 

@

 to “

” while pressing

down the Lock Button 

$

 located on the switch. To start

playback, press 4/6 

!

.

• To stop playback temporarily (Still Playback), press

4

/6 

!

.

• To stop playback, press 5 

7

.

• Turn the SHUTTLE SEARCH Ring 

#

counterclockwise (2) and release to rewind, or
clockwise (3) and release to fast-forward the tape
during Stop mode.

• High-speed picture search (Shuttle Search) is

possible by turning the SHUTTLE SEARCH Ring 

#

counterclockwise (2) or clockwise (3) during
playback (holding the SHUTTLE SEARCH Ring 

#

continues search until released).

• Press the Zoom Button T 

Y

 on the remote control to

zoom in (up to 44X*/50X**), or W 

T

 to zoom out. You

can also magnify a particular part of an image
(

墌

 pg. 39).

* GR-DX95/DX75 only
**GR-DX300/DX100 only

• At any time, pressing 4/6 

!

 resumes normal

playback.

Slow-Motion Playback/Playback Special Effects/
Playback Zoom:
Available only with the remote control (

墌

 pg. 39)

..... press VOL. + 

e

 to turn up the volume, or – 

w

 to

turn down the volume.

During Shuttle Search, parts
of the picture may not be
clearly visible, particularly on
the left side of the screen.

  01 DX300/100/95/75EK_EN 12-16

2/26/03, 7:12 PM

14