Panasonic PV-GS500 User Manual

Record mode

LSQT0975

On this model, [O.I.S.] is used as the indication 
for Optical Image Stabilizer.
Reduces the jitter caused by hand movement 
when recording.
≥Set to Tape/Card Recording Mode.

ª

Set [ADVANCED] >> [O.I.S.] >> [OFF].

≥When recording still pictures in the Card 

Recording mode, pressing the [PHOTO SHOT] 
button halfway increases the effect of the image 
stabilizer function. (MEGA Optical Image 
Stabilizer) 

≥When a tripod is used, we recommend that you 

turn the image stabilizer off.

≥In the following cases, the image stabilizer 

function may not work effectively.

≥When the digital zoom is used
≥When the Camcorder is shaken greatly
≥When you record a moving subject while 

tracking it

Records still pictures continuously at a certain 
interval.
≥Set to Card Recording Mode.

Set [BASIC] >> [PICTURE SIZE] >> [

Set [ADVANCED] >> [BURST MODE] >> 
[ON].

Press and hold the [PHOTO SHOT] button.

ª

Release the [PHOTO SHOT] button.

≥You can press the [PHOTO SHOT] button 

halfway and then start RapidFire Consecutive 
Photoshot. (Focusing is fixed. If the image 
stabilizer function is turned on, then MEGA 
Optical Image Stabilizer will be activated.) 

≥The Camcorder records up to 10 still pictures at 

intervals of 0.7 seconds.

≥One more still picture may be recorded after you 

release the [PHOTO SHOT] button.

≥This is not mega pixel still-picture recording.
≥The flash is not used.
≥If the self-timer is set, the Camcorder records up 

to 10 still pictures continuously.

≥Intervals between recording pictures may 

become longer depending on the card. We 
recommend using a Panasonic SD Memory 
Card.

≥When using the card formatted by other 

equipment or a card that was recorded and 
erased repeatedly, the intervals between 
recording pictures may become longer. If so, 
back up your important data on a PC, and 
format your card with this Camcorder.

O.I.S.

PHOTO SHOT

LSQT0975_ENG.book  42 ページ  ２００５年１２月１９日　月曜日　午前９時５１分