Panasonic PV-GS500 User Manual
Edit mode
56
LSQT0975
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
disturbed when this portion of the tape is played
back.
ª
Before recording with audio dubbing
≥Set to Tape Recording Mode.
≥When you want to preserve the original sound
≥When you want to preserve the original sound
taken during recording, set [ADVANCED] >>
[AUDIO REC] >> [12bit] to record images.
(When set [16bit], the sounds taken during
recording are erased after recording with audio
dubbing.)
[AUDIO REC] >> [12bit] to record images.
(When set [16bit], the sounds taken during
recording are erased after recording with audio
dubbing.)
≥Set [BASIC] >> [REC SPEED] >> [SP] to record
images.
ª
To play back the sound recorded with
audio dubbing
audio dubbing
You can switch between the sound recorded with
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by
audio dubbing.
[MIX]:
It simultaneously plays back the original
sound and the sound added with audio
dubbing.
sound and the sound added with audio
dubbing.
≥During audio dubbing, it is automatically set to
[ST2].
Printing pictures by directly
connecting to the printer (PictBridge)
connecting to the printer (PictBridge)
To print pictures by directly connecting the
Camcorder to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
≥Insert a card and set to Card Playback Mode.
Camcorder to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
≥Insert a card and set to Card Playback Mode.
1
Connect the Camcorder and the printer with
the supplied USB cable.
the supplied USB cable.
1 USB cable
≥The [PictBridge] indication appears on the
screen of the Camcorder. (When the printer is
being recognized, the [PictBridge] indication
blinks.)
being recognized, the [PictBridge] indication
blinks.)
≥When no card is inserted in the Camcorder, the
[PictBridge] indication does not appear. (You
cannot print any pictures.)
cannot print any pictures.)
≥When the Camcorder and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.
≥We recommend using the AC adaptor as the
power supply.
≥When images are displayed in multi-screen,
they cannot be printed.
2
Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you
≥If there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
≥When you select [DPOF PRINT] for printing,
set the number of prints in DPOF setting.
≥When [DPOF PRINT] is selected, print after
you determine the paper size. (Step 6)
≥When [DPOF PRINT] is selected, date
printing is unavailable.
1
PictBridge
LSQT0975_ENG.book 56 ページ 2005年12月19日 月曜日 午前9時51分