Panasonic DMC-TS6 User Manual
- 132 -
GPS/Sensor
GPS Logs
Applicable modes:
Location information acquired in the GPS positioning is recorded continuously as a GPS log.
•
•
GPS logs are not recorded to the built-in memory. Please use the card.
1
Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/
SET].
SET].
2
Press 3/4 to select [Log Record], and then press [MENU/SET].
•
The message is displayed. Press [MENU/SET], and perform the operation of step
8
in
. (first time only)
3
Set [Recording interval] and [Recording duration].
4
Press 3/4 to select [Start] and then press [MENU/SET].
•
[
] is displayed while recording.
∫
End recording GPS log
1
Select [GPS Log] on the [GPS/Sensor] menu, and then press [MENU/SET].
2
Press 3/4 to select [Log Record], and then press [MENU/SET].
3
Press 3/4 to select [End], and then press [MENU/SET].
•
GPS log recording will end in the following case.
–
When [GPS Setting] is set to [OFF]
•
In the following cases, GPS log recording is canceled.
–
When this unit is turned off while the remaining battery power is indicated as [
] (flashing red)
–
When the remaining battery power is nearly exhausted while this unit is turned off
•
In the following cases, the file will be divided.
–
Changing the date
–
Changing the [World Time] area (time zone)
•
If positioning never succeeds during recording, a GPS log will not be created.
Record GPS Logs
[Recording
interval]
interval]
[60 SEC.], [30 SEC.], [15 SEC.]
•
When [30 SEC.] or [15 SEC.] is set, [48HRS] in [Recording duration]
cannot be set.
cannot be set.
•
Depending on the radiowave reception conditions, log recording intervals
may be longer.
may be longer.
[Recording
duration]
duration]
[ENDLESS], [48HRS], [24HRS], [12HRS], [6HRS]
•
To continue recording a log without setting an end time, set to
[ENDLESS].
[ENDLESS].