Panasonic DMC-TS6 User Manual
- 193 -
Wi-Fi
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection]
from [History Connection]
3
Press 3/4 to select [Send Images While Recording], and then press [MENU/SET].
4
Press 3/4 to select [PC], and then press [MENU/SET].
5
Press 3/4 to select connection method, and then press [MENU/SET].
6
Press 3/4 to select the PC you want to connect to, and then press [MENU/SET].
•
•
When the PC you want to connect to is not displayed, select [Manual Input], and enter the
computer name of the PC (NetBIOS name for Apple Mac computers).
computer name of the PC (NetBIOS name for Apple Mac computers).
7
Press 3/4 to select the destinations folder of the PC, and then press [MENU/SET].
•
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.].
[DISP.].
8
Take pictures.
•
•
You cannot change the settings while sending pictures. Wait until sending is complete.
•
Folders sorted by the sent date are created in the specified folder, and pictures are saved in those
folders.
folders.
•
If the screen for a user account and password entry appears, enter the one you set on your PC.
•
When the computer name (NetBIOS name for Apple Mac computers) contains a space (blank
character), etc., it may not be recognized correctly. If a connection attempt fails, we recommend that
you change the computer name (or NetBIOS name) to the one consisting of only alphanumeric
characters, with a maximum of 15 characters.
character), etc., it may not be recognized correctly. If a connection attempt fails, we recommend that
you change the computer name (or NetBIOS name) to the one consisting of only alphanumeric
characters, with a maximum of 15 characters.
When sending images to PC
Preparations:
•
Turn the computer on.
•
Prepare folders for receiving images on the PC before sending a picture to the PC.
•
If the workgroup of the destination PC has been changed from the standard setting, you also need
to change the setting of this unit in [PC Connection].
to change the setting of this unit in [PC Connection].
[Via Network]
When you want to connect to your PC via a wireless access point.
[Direct]