Panasonic DMC-TS6 User Manual
- 226 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started from the camera’s LCD monitor.
•
printed out and instruct that printing be started from the camera’s LCD monitor.
•
Grouped pictures are displayed individually.
•
Some printers can print directly from the card removed from the camera. For details, refer to the
operating instructions of your printer.
operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Check print quality and other settings on the printer before printing the pictures.
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Check print quality and other settings on the printer before printing the pictures.
1
Connect the printer and camera with the USB connection cable
(supplied).
(supplied).
2
Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the printer are connected, the alarm beeps. If this
happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.
power becomes low while the camera and the printer are connected, the alarm beeps. If this
happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.
•
Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
(May not be displayed depending on the type of printer used)
(May not be displayed depending on the type of printer used)
•
Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
•
Before inserting or removing a card/battery, turn the camera off, and disconnect the USB connection
cable.
cable.
•
Motion pictures cannot be printed out.
•
Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may bend out of shape which will cause a malfunction.) Do
not connect devices to incorrect terminals. Doing so may cause malfunction.
out. (Otherwise the connectors may bend out of shape which will cause a malfunction.) Do
not connect devices to incorrect terminals. Doing so may cause malfunction.
•
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
B Align the marks, and insert.