Panasonic HDC-TM200 User Manual

VQT1Y59

This allows recording of the pictures and sound 
to start approximately 3 seconds before the 
recording start/stop button is pressed.

 appears on the screen.

≥ Aim this unit at the subject and position it 

≥ There is no beep sound.
≥ After recording starts, the PRE-REC setting is 

cancelled.

≥ PRE-REC is cancelled in the following cases.

jIf you change the mode.
jIf you open the SD card cover when the 

[MEDIA SELECT] is set to [SD CARD] in 
recording mode.

jIf you press the MENU button.
jIf you turn the unit off.

≥ When the remaining time left for recording 

motion pictures is less than 1 minute, 
PRE-REC cannot be set.

≥ If you start recording less than 3 seconds after 

pressing the PRE-REC button, or while the 
PRE-REC indication flashes within about 
3 seconds after initiating the quick start 
operation, motion pictures for 3 seconds 
cannot be recorded.

≥ When the recording start/stop button is 

pressed, image shake and operation sound 
may be recorded.

≥ Images displayed on the thumbnail in playback 

mode will differ from the motion pictures 
displayed at the start of playback.

Message is displayed when this unit is moved 
rapidly.

Select the menu. (l 27)

≥ This function’s default setting is [ON].

When “CAMERA PANNING IS TOO FAST.” 
appears, move the unit slowly while recording.
≥ Set to [OFF] to turn off the message 

≥ Message will not appear while pausing the 

recording. (Message will appear even if it is 
pausing the recording if [DEMO MODE] is set 
to [ON])

≥ In some recording conditions, messages may 

not appear.

PRE-REC

# [SHOOTING GUIDE] 

# [ON]

HDCTM200&HS200GN-VQT1Y59_mst.book  47 ページ  ２００９年１月１５日　木曜日　午後７時３２分