Panasonic DMC-TZ65 User Manual
22
VQT1Z93
VQT1Z93
23
See P.18 for the setting procedure in the SETUP menu.
Using SETUP menu
(Continued)
LCD MODE
Make LCD monitor easier
to see.
to see.
OFF: Normal (cancel setting)
AUTO POWER LCD:
The brightness is adjusted automatically depending on
how bright it is around the camera.
how bright it is around the camera.
POWER LCD:
Makes screen brighter than normal (for outdoor use).
HIGH ANGLE:
Makes screen easier to see when taking pictures from
high positions. (becomes harder to see from the front)
high positions. (becomes harder to see from the front)
• ‘HIGH ANGLE’ will be cancelled when power is turned off
(including POWER SAVE).
• Block out sunlight (with hand, etc.) if reflection makes screen difficult to see.
• ‘AUTO POWER LCD’ or ‘HIGH ANGLE’ cannot be used in the following cases.
During playback mode or menu screen display, or when
connected to computer/printer.
• ‘POWER LCD’ will be deactivated if no operations are performed for 30
seconds while recording. (Brightness can be restored by pressing any button)
• Brightness/colour of screen in ‘LCD MODE’ has no effect on pictures recorded.
• ‘AUTO POWER LCD’ cannot be set in playback mode.
• The number of recordable pictures and the recording time are
reduced when using ‘AUTO POWER LCD’ or ‘POWER LCD’.
DISPLAY SIZE
Change the display size
of the menu.
of the menu.
STANDARD/LARGE
GUIDE LINE
Select recording
information display and
types of guidelines.
(P.42)
information display and
types of guidelines.
(P.42)
REC. INFO.
OFF/ON (Display recording information with guide lines.)
OFF/ON (Display recording information with guide lines.)
PATTERN
/
: Change the patterns of guide lines.
HISTOGRAM
Check subject brightness
on graph. (P.42)
on graph. (P.42)
OFF/ON
REC AREA
Enables verification of
the recordable area for
a motion picture before
recording.
the recordable area for
a motion picture before
recording.
OFF/ON
This section is not
recorded.
• Recordable area displayed for motion
pictures should be interpreted as a
guideline.
• When using extended optical zoom,
the recordable area may not always be
displayed for certain zoom ratios.
• This setting cannot be used with Intelligent
Auto Mode.
Item
Settings, notes
The ‘REC AREA’ menu item is not available in the DMC-TZ6/DMC-TZ65.
ECONOMY
Turn off LCD monitor
and power while not
in use to save battery
consumption.
and power while not
in use to save battery
consumption.
POWER SAVE
OFF/2MIN./5 MIN./10MIN. :
Automatically shut off power while not in use.
OFF/2MIN./5 MIN./10MIN. :
Automatically shut off power while not in use.
• To restore → Press the shutter button halfway, or turn on
the power again.
• Cannot be used in the following cases:
When using AC adaptor (DMW-AC5E, optional), when
connected to computer/printer, during motion picture
recording/playback, during slideshows
connected to computer/printer, during motion picture
recording/playback, during slideshows
• Settings fixed to ‘2 MIN.’ in ‘AUTO LCD OFF’ (below),
‘5 MIN.’ in INTELLIGENT AUTO Mode or CLIPBOARD
Mode, or ‘10 MIN.’ while slideshow is paused.
Mode, or ‘10 MIN.’ while slideshow is paused.
AUTO LCD OFF
OFF/15SEC./30SEC. :
LCD monitor is shut off if no operations are performed for
a set period while recording. (Status indicator is illuminated
while monitor is off.)
OFF/15SEC./30SEC. :
LCD monitor is shut off if no operations are performed for
a set period while recording. (Status indicator is illuminated
while monitor is off.)
• Cannot be used in the following cases:
When using INTELLIGENT AUTO Mode, CLIPBOARD
Mode, or AC adaptor (DMW-AC5E, optional), when menu
screen is displayed, when using self-timer setting or
during motion picture recording.
Mode, or AC adaptor (DMW-AC5E, optional), when menu
screen is displayed, when using self-timer setting or
during motion picture recording.
• To restore → Press any button.
AUTO REVIEW
Automatically display
pictures immediately
after taking them.
pictures immediately
after taking them.
OFF: No auto review
1 SEC./2 SEC. : Automatically display for 1 or 2 seconds.
HOLD: Auto review screen remains until a button (other
1 SEC./2 SEC. : Automatically display for 1 or 2 seconds.
HOLD: Auto review screen remains until a button (other
than the display button) is pressed
ZOOM: Displays for 1 second, then at 4x zoom for 1
second
• Fixed to ‘2 SEC.’ in INTELLIGENT AUTO Mode.
• In ‘SELF PORTRAIT’, ‘PANORAMA ASSIST’, ‘HI-SPEED
• In ‘SELF PORTRAIT’, ‘PANORAMA ASSIST’, ‘HI-SPEED
BURST’, and ‘FLASH BURST’ scene modes, ‘AUTO
BRACKET’, ‘MULTI ASPECT
BRACKET’, ‘MULTI ASPECT
’, ‘BURST’ Mode, or
pictures with audio, auto review performed regardless of
setting.
setting.
• Motion pictures cannot be automatically reviewed.
Item
Settings, notes