Panasonic DMC-TZ65 User Manual
76
VQT1Z93
VQT1Z93
77
See P.18 for menu setting procedure.
Using REC/MOTION PICTURE menu
(Continued)
REC/PLAY switch:
I.EXPOSURE
Automatically adjusts contrast and exposure to give more lifelike colours when there is
significant contrast between background and subject.
significant contrast between background and subject.
MODE:
→ REC/MOTION PICTURE menu
→ REC menu
Settings: OFF/ON
(
displayed on screen)
Even if ‘SENSITIVITY’ is set to ‘80’ or ‘100’, when I.EXPOSURE is activated, images
may be taken at a higher sensitivity than the setting.
Correction effects may not be achieved under certain conditions.
BURST
Enables a rapid succession of photographs to be taken. Succession of photographs taken
while shutter button is held down.
while shutter button is held down.
MODE:
→ REC menu
→ REC menu
Settings:
BURST setting
Speed
No. of pictures
1
OFF
No burst
(Burst)
2.3 pictures/sec. (
)
2.5 pictures/sec. (
)
Fine: Max. 3
Standard: Max. 5
Standard: Max. 5
(Free)
Approx. 1.8 pictures/sec
2
(
)
Approx. 2.0 pictures/sec
2
(
)
Until card/built-in memory is full
1
: When using self-timer: Fixed at 3 pictures
2
: Becomes progressively slower. (Delayed timing depends on card type, PICTURE SIZE, and QUALITY.)
Focus is fixed from first picture.
When
When
is selected, the exposure and white balance are fixed to the settings for the first picture.
When
is selected, exposure and white balance is adjusted for each picture.
Burst speed may be reduced if SENSITIVITY is set to high, or if shutter speed is
reduced in darker locations.
When burst setting is used, flash is set to ‘FORCED FLASH OFF’, and AUTO
BRACKET, MULTI ASPECT
, and AUDIO REC. settings are cancelled.
Settings will be stored even if power is turned off.
When using
When using
while following a moving subject in locations with major differences in
brightness, optimal exposure may not be achieved.
Auto review performed regardless of AUTO REVIEW setting.
Cannot set to BURST in TRANSFORM, PANORAMA ASSIST, HI-SPEED BURST,
Cannot set to BURST in TRANSFORM, PANORAMA ASSIST, HI-SPEED BURST,
FLASH BURST, STARRY SKY, PIN HOLE, and FILM GRAIN scene modes.
Using the ‘HI-SPEED BURST’ scene mode allows a faster succession of photographs to be taken.
FLASH BURST is convenient to take continuous still pictures using flash in dark places. (P.56)
DIGITAL ZOOM
Multiplies effect of optical zoom or extra optical zoom by up to 4 times. (See P.39 for details)
MODE:
→ REC/MOTION PICTURE menu
→ REC menu
Settings: OFF/ON
This is fixed at ‘ON’ when MACRO ZOOM is set.
COLOR MODE
Set colour effects.
MODE:
→ REC/MOTION PICTURE menu
→ REC menu
Settings: STANDARD / NATURAL
(soft)
/ VIVID
(sharp)
/ B/W / SEPIA / COOL
(more blue)
/ WARM
(more red)
If interference is noticeable in dark locations: Set to ‘NATURAL’.
In
In
(INTELLIGENT AUTO mode), ‘STANDARD’, ‘B/W’, and ‘SEPIA’ only can be set.
‘NATURAL’ and ‘VIVID’ cannot be set for motion picture recording.
STABILIZER
Automatically detects and prevents jitter.
MODE:
→ REC menu
→ REC menu
Settings:
Settings
Effect
OFF
Pictures deliberately taken with no jitter correction
AUTO
The optimum image stabilizer is performed automatically based on the recording
conditions.
MODE1
Constant correction
(Monitor image stable, composition easy to determine)
MODE2 Correction at moment shutter button is pressed
(More effective than MODE1)
Setting fixed to ‘MODE2’ in ‘SELF PORTRAIT’ and ‘OFF’ in ‘STARRY SKY’ scene
modes.
Cases where optical image stabilizer may be ineffective:
Heavy jitter, high zoom ratio (including digital zoom range), fast-moving objects, indoors
or in dark locations (due to low shutter speed)
This is fixed at ‘MODE1’ during motion picture recording.