Panasonic AG-HPX371E User Manual
1
Chapter
6
Manipulating
Clips
with
Thumbnails
Thumbnails
Setting of Proxy (optional)
Installing the video encoder card (AJ-YAX800G, optional
accessory) in P2 card slot 2 makes it possible to set up the
proxy recording function.
The video encoder card is not recognized when inserted if
the power for the unit is turned on. Insert the video encoder
card after turning off the power for the unit.
Select OPERATION DEVICE SETUP PROXY from the
thumbnail menu to specify the setting.
For details on how to install and set up the video encoder
card, refer to the User’s Guide of the video encoder card.
accessory) in P2 card slot 2 makes it possible to set up the
proxy recording function.
The video encoder card is not recognized when inserted if
the power for the unit is turned on. Insert the video encoder
card after turning off the power for the unit.
Select OPERATION DEVICE SETUP PROXY from the
thumbnail menu to specify the setting.
For details on how to install and set up the video encoder
card, refer to the User’s Guide of the video encoder card.
NOTE
• When “PROXY CARD ERROR” is indicated in the viewfinder,
either check the video encoder card or set the unit so that
proxy recording is not performed.
proxy recording is not performed.
• The proxy function cannot be set when recordings can still
be compiled to a previous clip in one-clip recording mode
(i.e., when “1CLIP” is displayed). Close the menu and
press the STOP button for about 2 seconds to stop the clip
compiling process, and then perform the operation.
(i.e., when “1CLIP” is displayed). Close the menu and
press the STOP button for about 2 seconds to stop the clip
compiling process, and then perform the operation.
Formatting a P2 Card
1
PresstheTHUMBNAILbutton.
• The thumbnail screen appears on the LCD
monitor.
2
PresstheTHUMBNAILMENUbuttonand
selectOPERATIONFORMATfromthe
thumbnailmenu.
selectOPERATIONFORMATfromthe
thumbnailmenu.
• When the screen shown below appears, select the
slot number of the P2 card you want to format and
press the SET button.
press the SET button.
• Select EXIT if formatting is not required.
3
Thefollowingscreenappears.Usethecursor
buttonsandtheSETbuttontoselectYES.
buttonsandtheSETbuttontoselectYES.
• The selected P2 card is formatted.
NOTE
Check that no important data remains on a card before
formatting since data erased by formatting cannot be
recovered.
formatting since data erased by formatting cannot be
recovered.