Panasonic AG-HPX371E User Manual
14
Chapter
7
Men
uOper
uOper
ations
Item
Setting
Notes
1394 AUDIO OUT
Selects audio channel output to 1394 OUT in DVCPRO
or DV mode.
CH1/CH2, CH3/CH4
or DV mode.
CH1/CH2, CH3/CH4
• Available only when SYSTEM MODE
is set to 480-59.94i (576-50i) and REC
FORMAT is set to DVCPRO or DV.
FORMAT is set to DVCPRO or DV.
OUTPUT SEL screen
Item
Setting
Notes
SDI SELECT
Sets the signal format type output from the SDI OUT
connector.
AUTO:
connector.
AUTO:
Depends on SYSTEM MODE setting.
1080i
*1
:
Outputs 1080-59.94i (1080-50i) also when
SYSTEM MODE setting is 720-59.94P (720-50P).
480i (576i):
480i (576i):
Output is locked to 480-59.94i (576-50i)
regardless of SYSTEM MODE setting.
• Not available when SYSTEM MODE is
set to 480-59.94i (576-50i). Then 480i
(576i) is output at all times.
(576i) is output at all times.
SDI METADATA
Sets metadata (UMID) superimposition onto SDI OUT.
ON:
ON:
Superimposes metadata.
OFF:
Does not superimpose metadata.
SDI EDH
Sets EDH superimposition when SDI OUT is an SD
signal (480i (576i)).
ON:
signal (480i (576i)).
ON:
Superimposes EDH.
OFF:
Does not superimpose EDH.
DOWNCON MODE
Sets downconverter output (VIDEO OUT and 480i
(576i) SDI OUT) in HD mode (1080i, 720P).
SIDE CROP, LETTER BOX, SQUEEZE
(576i) SDI OUT) in HD mode (1080i, 720P).
SIDE CROP, LETTER BOX, SQUEEZE
• Not available when SYSTEM MODE is
set to 480-59.94i (576-50i).
VIDEO OUT CHAR
Specifies whether or not characters are superimposed
on VIDEO OUT signals.
ON:
on VIDEO OUT signals.
ON:
Superimposes characters.
OFF:
Does not superimpose characters.
• This setting is disabled when a remote
control unit (AJ-RC10G) or extension
control unit (AG-EC4G) is connected,
in which case the settings on the
remote control unit or extension control
unit have priority.
control unit (AG-EC4G) is connected,
in which case the settings on the
remote control unit or extension control
unit have priority.
VIDEO OUT ZEBRA
Specifies whether or not zebra pattern is
superimposed on VIDEO OUT signals.
ON:
superimposed on VIDEO OUT signals.
ON:
Displays a zebra pattern also on images output
via the VIDEO OUT connector.
OFF:
OFF:
The zebra pattern is not displayed in video
output from the VIDEO OUT connector.
TC OUT
Sets the time code type output from the TC OUT
connector.
TCG:
connector.
TCG:
Outputs the time code generator value of the
camera at all times.
TCG/TCR:
TCG/TCR:
Outputs time code generator value during
camera recording and outputs the played back time
code during video playback.
code during video playback.
TC VIDEO SYNCRO
Sets the delay of time code output from the TC OUT
connector.
TC IN:
connector.
TC IN:
Does not delay output of input to TC IN
connector.
VIDEO OUT:
VIDEO OUT:
Outputs the time code in line with delay
of video output from the VIDEO OUT connector.
*1 Use 1080i selected in a SYSTEM MODE setting of 720-59.94P (720-50P) for checking video.
____ indicates the factory setting