Panasonic DMC-SZ8 User Manual

- 130 -

Connecting to other equipment

If you connect the camera to a printer supporting PictBridge, you can select the pictures to be 
printed out and instruct that printing be started on the camera’s monitor.
•

Some printers can print directly from the card removed from the camera. For details, refer to the 
operating instructions of your printer.

Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Check print quality and other settings on the printer before printing the pictures.

•

Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)

•

Do not use any other USB connection cables except the supplied one or a genuine 
Panasonic USB connection cable (DMW-USBC1: optional).

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

•

If the remaining battery power becomes low while the camera and the printer are connected, the 
alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB 
connection cable.

•

Disconnect the USB cable only after you turn off the camera.

•

Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed.
(May not be displayed depending on the type of printer used)

•

Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•

Motion pictures cannot be printed out.

A USB connection cable (supplied)
B Align the marks, and insert.