Panasonic AG-HSC1UP User Manual
107
VQT1F36
Others
≥Underlined items are the initial shipping
condition.
ª [REC LAMP]
The recording lamp lights during recording and
flashes when the unit receives a signal from the
remote control or when the self-timer is counting
down. When this is set to [OFF], it does not light
during recording.
flashes when the unit receives a signal from the
remote control or when the self-timer is counting
down. When this is set to [OFF], it does not light
during recording.
ª [DISPLAY]
The screen indications are selected as shown in
the illustration below.
the illustration below.
ª [POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without any
operation, this unit automatically turns off to
prevent the battery from running down. When
you use this unit, turn it on again.
≥In the following cases, the unit may not turn off
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without any
operation, this unit automatically turns off to
prevent the battery from running down. When
you use this unit, turn it on again.
≥In the following cases, the unit may not turn off
even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or
– When connecting the unit to a computer or
printer via the USB cable
ª [BEEP SOUND]
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps/4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(l 110)
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps/4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(l 110)
ª [INITIAL SET]
When there is a menu that cannot be selected
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
(The language setting cannot be changed back
to the initial shipping condition.)
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
(The language setting cannot be changed back
to the initial shipping condition.)
ª [DEMO MODE]
This item is used to start the unit demonstration.
(Only when the mode dial is at the
(Only when the mode dial is at the
position)
If you set [DEMO MODE] to [ON] without
inserting an SD card, the demonstration
automatically starts. If any operation takes place,
the demonstration is canceled. However if no
operations take place for approx. 10 minutes, the
demonstration automatically starts again. To
stop the demonstration, set [DEMO MODE] to
[OFF] or insert an SD card. For normal use, set
[DEMO MODE] to [OFF].
inserting an SD card, the demonstration
automatically starts. If any operation takes place,
the demonstration is canceled. However if no
operations take place for approx. 10 minutes, the
demonstration automatically starts again. To
stop the demonstration, set [DEMO MODE] to
[OFF] or insert an SD card. For normal use, set
[DEMO MODE] to [OFF].
Menus related to [ADVANCED]
and [SETUP]
≥[OFF]
≥[ON]
≥[OFF]
≥[ON]
[OFF]
[ON]
≥[OFF]
≥[5 MINUTES]
15.12.2006
R30min
30min
0h00m00s
AUTO
HN
≥[OFF]
≥[ON]
≥[YES]
≥[NO]
≥[OFF]
≥[ON]
VQT1F36_ENG_PP.book 107 ページ ２００７年２月２６日 月曜日 午前１１時２９分