Panasonic AG-HSC1UP User Manual

Page of 140
28
VQT1F36
Setup
Setup
Charging the battery
When this unit is purchased, the battery is not 
charged. Charge the battery before using this 
unit.
Connect the battery to an AC adaptor to 
recharge it.
The battery cannot be recharged by simply 
inserting it into the unit. 
If the DC cable is connected to the AC 
adaptor, then the battery will not charge. 
Remove the DC cable from the AC adaptor.
The Panasonic battery that can be used 
with this unit is VW-VBG130. Other 
Panasonic batteries will not work. (
30)
1
Connect the AC cable to the AC 
adaptor and the AC outlet.
≥Remove the DC cable beforehand.
2
Put the battery on the battery 
mount by aligning the mark, and 
then securely plug it in.
≥The output plug of the AC cable is not 
completely connected to the AC adaptor 
jack. As shown in A, there is a gap.
ª Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: Make sure that the terminals of the 
battery or the AC adaptor are not 
exposed to dirt, foreign objects or 
dust, then reconnect them properly.
Disconnect the AC cable from the AC 
outlet when you remove dirt, foreign 
objects or dust on the terminals of the 
battery or the AC adaptor.
If the charging lamp is still flashing, 
something may be wrong with the 
battery or AC adaptor. Contact your 
dealer.
≥Battery charging time (
≥We recommend using Panasonic batteries 
(VW-VBG130).
≥If you use other batteries, we cannot guarantee 
the quality of this product.
A
VQT1F36_ENG_PP.book  28 ページ  2007年2月26日 月曜日 午前11時29分