Panasonic AG-HSC1UP User Manual

Page of 140
60
VQT1F36
Recording
To cancel the guide line function
Press the MENU button, then select [BASIC] or 
[PLAY SETUP] 
# [GUIDE LINES] # [OFF] and 
press the cursor button.
≥The guide lines do not appear on the images 
actually recorded.
¬
Rotate the mode dial to select 
.
Press the MENU button, then select 
[VIDEO] 
#
 [WIND CUT] 
#
 [ON]
 
and 
press the cursor button.
To cancel the wind noise reduction 
function
Press the MENU button, then select [VIDEO] 
[WIND CUT] 
# [OFF] and press the cursor 
button.
≥This function’s default setting is [ON].
≥The wind noise reduction depends on the wind 
strength. (The surround effect may be reduced 
if this function is activated in strong winds. 
However, the surround effect is automatically 
restored when then the wind weakens.)
≥The wind noise reduction function does not 
work with an external microphone.
When recording, the input level from the built-in 
microphones and the external microphone 
terminal can be adjusted.
¬
Rotate the mode dial to select 
.
1
Press the MENU button, then 
select [VIDEO] 
#
 [MIC LEVEL] 
#
 
[SET
r
AGC] or [SET]
 
and press 
the cursor button.
AGC: Auto Gain Control
[AUTO]: 
AGC is activated, and the 
recording level is adjusted 
automatically.
[SETrAGC]: The desired recording level can be 
set. AGC will also be activated to 
reduce the amount of sound 
distortion.
[SET]:
AGC is not activated and so natural 
recording can be performed.
Wind noise reduction function
This is for reducing the wind noise 
coming into the microphone when 
recording.
Microphone level
This is for adjusting the microphone 
input level.
VQT1F36_ENG_PP.book  60 ページ  2007年2月26日 月曜日 午前11時29分