Panasonic AG-HSC1UP User Manual

Page of 140
64
VQT1F36
Recording
If auto focusing is difficult due to the conditions, 
then manual focusing is available.
¬
Rotate the mode dial to select 
.
1
(When MF assist function is used)
Press the MENU button, then 
select [ADVANCED] 
#
 
[MF ASSIST]
 #
 [ON] and press 
the cursor button.
≥The default setting is [ON].
2
Set the AUTO/MANUAL/FOCUS 
switch to MANUAL.
3
Move the switch down and set it 
to FOCUS position.
The manual focus indication [MF] and the 
icon shown in the illustration appear.
4
Move the cursor button left or 
right to bring the subject into 
focus.
The center of the screen is enlarged. The 
normal screen returns approximately 
2 seconds after you finish bringing the 
subject into focus.
≥The center of the screen is not enlarged 
when [MF ASSIST] is [OFF].
To restore to the automatic adjustment
Press the AUTO/MANUAL/FOCUS switch down 
again to the FOCUS position.
≥You can also restore the auto focusing by 
setting the AUTO/MANUAL/FOCUS switch to 
AUTO.
≥The subject may not be in focus when zoomed 
in if focusing with a wide angle. First, zoom in 
on the subject, and then focus on it.
The center of the screen is enlarged during 
manual focus adjustment. This allows you to 
focus on the subject more easily.
≥MF assist does not work if the zoom 
magnification is more than 12k.
≥The part of the screen that is enlarged is not 
enlarged on the image actually recorded.
≥The zebra pattern does not appear on the part 
of the screen that is enlarged when [ZEBRA] is 
[ON].
Manual focus adjustment
AUTO
MANUAL
FOCUS
AUTO
MANUAL
FOCUS
About the MF assist function
VQT1F36_ENG_PP.book  64 ページ  2007年2月26日 月曜日 午前11時29分