Panasonic AG-HPX600EJ User Manual

– 105 –

The USB host indicator is displayed in USB host mode; the WLAN indicator is displayed in WLAN mode; the LAN indicator is displayed in LAN 
mode.

The numbers set by the camera for all the clips recognized correctly by the P2 card. These numbers are allocated in chronological order by shooting 
date and time.
If clips cannot be played because of different recording formats, they are displayed in red.

Displayed for defective clips, which may result from various causes such as turning off the power during recording.
Clips with yellow defective clip indicators can sometimes be restored.
For details, refer to “Restoring clips” (page 109).
Clips with red defective clip indicators cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.
[ ] is displayed for clips which differ in format from the P2 standard.

Displayed when clips are recorded on multiple P2 cards and either of the P2 cards is not inserted in a P2 card slot.

Displayed for the clip of a thumbnail with a shot mark attached.
For details, refer to “Shot mark recording function” (page 44).

Displayed for clips with proxy attached.

Displayed for clips with text memo data attached.

Displayed on an edit copied clip when the model supports edit copy, such as the AJ-HPM200. For more information about edit copying, refer to the 
operating instructions for a model that supports edit copying. 

Displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format.

Indicates which part of the whole thumbnail is currently being viewed.

Displays remaining battery level. For details, refer to “Battery charge level display” (page 76) on the “Viewfinder status display” section.

Displays the selection status of the clip when a clip is selected.

Displayed when clips cannot be played back.

@

@

 tThe [ ] selected clip indicator and the [

] not playable clip indicator are displayed only when the [EVF TYPE] item on the setting menu 

[DISPLAY SETUP] screen is set to [B/W].

Multiple thumbnails can be randomly selected on the thumbnail screen.

The frame around the selected thumbnail changes to a blue frame. 
Press the <SET> button again to deselect the clip.
The blue frame display and the selected clip indicator are displayed 
when [B/W] is selected with the [EVF TYPE] item on the setting menu 
[DISPLAY SETUP] screen.

To select additional clips, repeat step 1.

It is possible to display only the selected thumbnails on the thumbnail 
screen for playback.
For details, refer to “Switching the thumbnail display” (page 106).

@

@

 tWhile holding down the <SHIFT> button, use the cursor up and 

down buttons (`/{) to move the pointer to the first or last clips.

 tAfter selecting a clip, move the pointer to another clip and while 

holding down the <SHIFT> button, press the <SET> button to 

select all clips from the previously selected clip to the pointer 

position.

 tWhile holding down the <SHIFT> button, press the <EXIT> button 

to deselect all the clips.