Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. AG-HPX600EJ
  5. User Manual

Panasonic AG-HPX600EJ User Manual

Download
Page of 178
– 159 –
Chapter 10 Maintenance and Inspection — Warning system
 
r
Soft keyboard
Message
Description
Measure
CANNOT CHANGE!
An attempt is made to enter a [PERSON] (user who enters 
the memo) when a text memo is not available.
Enter the [TEXT] (text information) first.
CANNOT SET!
INVALID VALUE!
The entered value is invalid.
Change the input value.
 
r
Hard disk drive (USB host mode)
Message
Description
Measure
CANNOT ACCESS CARD!
An error occurred while accessing the P2 card.
Check the P2 card.
CANNOT ACCESS TARGET!
An error occurred while accessing the connection target.
Check the hard disk drive status or the connection.
CANNOT FORMAT!
The hard disk drive cannot be initialized.
Change the connected hard disk drive.
CANNOT RECOGNIZE HDD!
The destination target cannot be properly recognized.
Reboot the hard disk drive or connect another hard disk drive.
CARD IS EMPTY! CANNOT 
COPY!
The P2 card to copy is empty.
The copy operation is not performed because the card is 
empty.
FORMAT P2 CARD!
A warning indicates that the copy operation cannot be 
performed at the hard disk drive → P2 import because the P2 
card is already recorded.
The copy operation cannot be performed because the target 
P2 card is not empty. Format the card using a P2 device and 
try again.
LACK OF CAPACITY!
Not enough space left on the hard disk drive.
There is not enough space on the connected target, so use a 
new hard disk drive or formatted hard disk drive.
HDD DISCONNECTED!
The hard disk drive is disconnected.
Reconnect the USB connection cable. If the hard disk drive 
does not operate properly, turn it off and turn it back on again.
MISMATCH COMPONENT!
The copy operation cannot be performed because the P2 card 
capacities and models do not match between the source and 
the target.
Use the P2 cards of the same model, or import on a clip basis.
TOO MANY PARTITIONS!
There are too many partitions.
The maximum number of partitions is 23, so use a new hard 
disk drive or formatted hard disk drive.
TOO MANY TARGETS!
Multiple devices are connected.
Disconnect the devices, turn off the camera, and then turn it 
back on again.
UNKNOWN DEVICE 
CONNECTED!
A non-compatible DVD drive or other device is connected.
Disconnect the devices, turn off the camera, and then turn it 
back on again.
VERIFICATION FAILED!
The compare check performed after copying failed.
Copy the data again.