Panasonic DMCFZ47K User Manual

•

This will work when the HDMI mini cable (optional) is connected.

•

Refer to 

 for the method to playback 3D pictures in 3D.

•

Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not 
turn the camera off during formatting.

•

If a card has been inserted, only the card is formatted. To format the built-in memory, remove 
the card.

•

If the card has been formatted on a PC or other equipment, format it on the camera again.

•

It may take longer to format the built-in memory than the card.

•

If the card cannot be formatted, please try another card before contacting your nearest Service 
Center.

Setup the output method for 3D pictures.

Set when connecting to a 3D compatible television.

Set when connecting to a television not compatible 
with 3D.
Set this when you would like to view pictures in 2D 
(conventional image) on a 3D compatible television.

} [SCENE MENU]

Set the screen that is displayed when the mode dial is set to [

], 

[

], [

], [

], [

] and [

].

The recording screen in the currently selected 
Advanced Scene Mode or Scene Mode appears.

[AUTO]: The Advanced Scene Mode or Scene Mode menu 

screen appears.

The last operated menu position is saved even if the camera is 
turned off.

It is possible to check which version of firmware is on the camera.

The built-in memory or card is formatted. Formatting irretrievably 
deletes all the data so check the data carefully before formatting.

For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or 
send e-mail to: lumixconcierge@ca.panasonic.com

For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at: 
http://www.panasonic.com/contactinfo