Panasonic DMC-TS3 User Manual
- 64 -
Recording
[Rec] Mode:
·
¿
Taking Pictures Using Auto Bracket
In this mode, 3 pictures are automatically recorded in the selected Exposure
Compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
Compensation range each time the shutter button is pressed. You can select the picture
with the desired exposure from the 3 pictures with different exposures.
With Auto Bracket
d1 EV
Note
•
When setting Auto Bracket, [
] appears on the screen.
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
When the exposure is compensated, the Exposure Compensation value appears on the lower
left of the screen.
pictures taken are based on the selected Exposure Compensation range.
When the exposure is compensated, the Exposure Compensation value appears on the lower
left of the screen.
•
The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
subject.
•
[Œ] is set for the flash when Auto Bracket is set.
•
Setting of the auto bracket cannot be performed in following conditions.
–
In [Transform], [Panorama Assist], [Handheld Night Shot], [Hi-Speed Burst], [Flash Burst],
[Starry Sky], [Pin Hole], [Film Grain] and [Photo Frame] in Scene Mode
[Starry Sky], [Pin Hole], [Film Grain] and [Photo Frame] in Scene Mode
–
When recording motion pictures
1st picture
2nd picture
3rd picture
d0 EV
j1 EV
i1 EV
Press
3 [È] until [Auto Bracket] appears, set the
compensation range of the exposure with
2/1.
•
When you do not use Auto Bracket, select [OFF] (0).
Press [MENU/SET].