Panasonic DMC-TS3 User Manual
- 84 -
Recording
Positioning is started once the GPS function is started, and acquired location name
information and other information can be stored in the recorded pictures.
information and other information can be stored in the recorded pictures.
Press
3/4 to select [ON] or [
] and then press [MENU/SET].
•
Exit the menu after it is set.
Note
•
Even if the receiving condition of the radio waves is excellent, it may take 2 to 3 minutes
to complete the positioning when performing positioning for the first time or when you
perform positioning after turning on the power again after turning the power off with the
[GPS Setting] set to [
to complete the positioning when performing positioning for the first time or when you
perform positioning after turning on the power again after turning the power off with the
[GPS Setting] set to [
] or [OFF].
•
When [GPS Setting] is set to [ON], the GPS function will operate even when the power is
turned off. Electromagnetic waves from this unit may affect other electronic devices, so
set [GPS Setting] to [OFF] or [
turned off. Electromagnetic waves from this unit may affect other electronic devices, so
set [GPS Setting] to [OFF] or [
] and turn the power of the unit off when you carry this
unit onboard an airplane or inside a hospital etc.
• GPS status indicator
is lit during the positioning. Also, when
the
GPS status indicator
is lit with the power is turned off,
[GPS Setting] is set to [ON].
A GPS status indicator
Acquiring of the GPS information
Item
Settings
[ON]
•
Starts the GPS to receive radio waves.
•
It will continuously perform the positioning even if the power is turned
off when set to [ON].
off when set to [ON].
[
]
•
It will perform the positioning only when the power is turned on.
•
It will not perform the positioning when the power is turned off.
[OFF]
—
[INFO]
•
You can check or update the GPS information
•
For detail, refer to
.