Panasonic HDC-DX1PC User Manual

Page of 144
100
LSQT1093
With other products
With a printer (PictBridge)
(SD)
To print pictures by directly connecting this unit 
to the printer, use a printer compatible with 
PictBridge.
(Read the operating instructions for the printer.) 
≥Use the AC adaptor to free you from worrying 
about the battery running down.
Insert an SD card with recorded images in 
this unit and then set the mode dial to 
 
to turn on the power.
1
Connect this unit and a printer.
A USB cable (supplied)
≥Insert the plugs as far as they will go.
The [PictBridge] indication appears on this 
unit’s screen.
≥If the [PictBridge] indication does not 
appear or continues to flash, disconnect 
and then reconnect the USB cable or check 
the printer, SD card and settings on this 
unit.
≥Do not use any other USB connection 
cables except the supplied one. (Operation 
is not guaranteed with any other USB 
connection cables.)
2
Select a file to be printed, then 
press the cursor button.
The number of pictures set is displayed.
3
Move the cursor button up or 
down to select the desired 
number of prints, then press the 
cursor button.
≥You can set up to 9 prints.
≥To cancel the setting, set the number of 
prints to [0].
≥Up to 8 files displayed can be set in 
succession by repeating steps 2 and 3.
4
Press the MENU button to 
display the PictBridge menus.
5
Select the date print setting on 
[DATE PRINT].
≥If the printer is not capable of date printing, 
this setting is unavailable.
A
LSQT1093ENG.book  100 ページ  2007年1月15日 月曜日 午前9時23分