Panasonic HDC-DX1PC User Manual
27
LSQT1093
Before using
≥Still pictures cannot be recorded on a disc
with this unit.
≥You cannot record or play continuously from
one side of the disc to the other when using a
double sided disc. You will need to eject the
disc and turn it over.
double sided disc. You will need to eject the
disc and turn it over.
≥Discs inserted in a holder, cartridge, or caddy
case cannot be used. Always remove bare
discs from these containers prior to use.
discs from these containers prior to use.
≥It is recommended that you use Panasonic
discs. Usually discs compatible with the DVD
standard can be used for recording and
playback with no problems. However, some
commercially available discs do not meet the
DVD standard for quality and performance. If
you use one of these discs, you may not be
able to record or playback normally. (The
message “RECOMMENDED TO USE
PANASONIC DISC” appears.)
standard can be used for recording and
playback with no problems. However, some
commercially available discs do not meet the
DVD standard for quality and performance. If
you use one of these discs, you may not be
able to record or playback normally. (The
message “RECOMMENDED TO USE
PANASONIC DISC” appears.)
≥Discs recorded on this unit may not be
playable on other products even if the other
products support the AVCHD. In such
cases, play back the disc on this unit
instead.
products support the AVCHD. In such
cases, play back the disc on this unit
instead.
≥When using DVD-RW, DVD-R or DVD-R DL
do not perform the following as it may make
the disc unusable.
the disc unusable.
– Record on a disc with other products after
recording on it with this unit.
– Record on a disc with this unit after recording
on it with other products.
– Insert an un-finalized disc in any other
products.
ª About DVD-R DL (dual layer on
single side)
DVD-R DL (dual layer on single side) discs have
two layers of recording and playback surface on
one side. If a scene does not fit on the first layer
(L0), recording continues on the second layer
(L1) so one scene is recorded across two layers.
This unit automatically switches layers during
disc playback so you can play the whole of the
disc continuously like a normal disc. However,
the image or the sound may momentarily stop at
the point where the layers switch.
two layers of recording and playback surface on
one side. If a scene does not fit on the first layer
(L0), recording continues on the second layer
(L1) so one scene is recorded across two layers.
This unit automatically switches layers during
disc playback so you can play the whole of the
disc continuously like a normal disc. However,
the image or the sound may momentarily stop at
the point where the layers switch.
ª Examples of discs that cannot be
used on this unit
≥DVD-RAM (2.6 GB) Ver. 1.0
≥DVD-R (3.9 GB) Ver. 1.0
≥DVD-R (4.7 GB) for Authoring Ver. 2.0
≥Discs other than those with diameter of 8 cm
≥DVD-R (3.9 GB) Ver. 1.0
≥DVD-R (4.7 GB) for Authoring Ver. 2.0
≥Discs other than those with diameter of 8 cm
(3q)
≥Dual layer on single side discs other than
DVD-R DL
≥iRW
≥iR
≥DVD-ROM
≥DVD-Video
≥CD-R
≥CD-RW
≥CD-ROM
≥CD
≥LD
≥MO
≥MD
≥iD
≥Floppy disk
≥iR
≥DVD-ROM
≥DVD-Video
≥CD-R
≥CD-RW
≥CD-ROM
≥CD
≥LD
≥MO
≥MD
≥iD
≥Floppy disk
LSQT1093ENG.book 27 ページ ２００７年１月１５日 月曜日 午前９時２３分