Panasonic HDC-DX1PC User Manual
68
LSQT1093
Recording
To return to automatic setting
Press the MENU button, then select [VIDEO]
>
[MIC LEVEL]
> [AUTO] and press the cursor
button.
≥Adjust the gain value so that the last 2 bars of
the microphone input level on the center of the
screen are not red. (Otherwise, the Sound is
distorted.) Select a lower setting for gain value
or set [MIC LEVEL] to [AUTO].
screen are not red. (Otherwise, the Sound is
distorted.) Select a lower setting for gain value
or set [MIC LEVEL] to [AUTO].
≥The front left and front right gain values only
work when input is from an external
microphone.
microphone.
≥The microphone input level meter shows the
largest volume for the microphones.
≥When [ZOOM MIC] is [ON], the volume will be
different depending on the zoom rate. Set
[ZOOM MIC] to [OFF] or set the microphone
input level after adjusting the zoom rate. (l 58)
[ZOOM MIC] to [OFF] or set the microphone
input level after adjusting the zoom rate. (l 58)
(RAM)
(-RW)
(-R)
(-R\DL)
(SD)
Parts where white saturation (color saturation) is
likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
likely to occur (extremely brightly lit or shiny
parts) are displayed with diagonal lines (zebra
pattern).
¬
Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED]
[ADVANCED]
#
[ZEBRA]
#
[ON] and
press the cursor button.
A Zebra pattern
≥You can record an image with little white
≥You can record an image with little white
saturation if you manually adjust the shutter
speed or brightness (iris/gain) (l 73).
speed or brightness (iris/gain) (l 73).
To cancel the zebra display
Press the MENU button, then select
[ADVANCED]
[ADVANCED]
# [ZEBRA] # [OFF] and press
the cursor button.
≥The zebra pattern does not appear on the
images actually recorded.
Zebra display
This is for displaying the parts that
are too bright
are too bright
A
LSQT1093ENG.book 68 ページ ２００７年１月１５日 月曜日 午前９時２３分