Panasonic HDC-DX1PC User Manual
87
LSQT1093
Disc and card management
(-RW)
¬
Rotate the mode dial to select
and then select the [
] (motion
picture playback) tab.
1
Press the MENU button, then
select [SETUP]
select [SETUP]
#
[UN-FINALIZE]
#
[YES] and press the cursor
button.
2
When the confirmation message
appears, select [YES], then press
the cursor button.
appears, select [YES], then press
the cursor button.
≥When un-finalizing is complete, press the
MENU button to exit the message screen.
≥Discs other than DVD-RW cannot be
un-finalized. If there is no space remaining on
the DVD-RW, the disc may not be un-finalized.
the DVD-RW, the disc may not be un-finalized.
≥When you un-finalize the disc, use a battery
with sufficient battery power or the AC adaptor.
(RAM)
¬
Rotate the mode dial to select
and then select the [
] (motion
picture playback) tab.
1
Connect this unit to the AC
adaptor.
≥Creating a top menu cannot be executed
when using a battery.
≥If the power supply stops while creating a
top menu, the creating a top menu will fail
and the data may be damaged.
and the data may be damaged.
2
Press the MENU button, then
select [SETUP]
#
[CREATE TOP MENU]
#
[YES]
and press the cursor button.
3
When the confirmation message
appears, select [YES], then press
the cursor button.
≥After creating the top menu, press the
MENU button to exit the message screen.
≥If a top menu is created, the disc becomes
play-only and you can no longer record.
≥The top menu that was created is not displayed
on this unit. It is displayed when the disc is
played back on other devices that support the
AVCHD.
≥Except for DVD-RAM, the top menu is created
during finalizing.
ª Deleting the top menu
If you insert a DVD-RAM on which a top menu
was created, the confirmation message appears
when you set a recording mode. If you select
[YES] to erase the top menu, the DVD-RAM can
be recorded and edited in the same way as
before the top menu was created.
Un-finalizing a DVD-RW
This is for un-finalizing a DVD-RW so
that it can be used for recording.
that it can be used for recording.
MENU
Creating a top menu
A top menu is displayed when a
DVD-RAM is played back on other
devices that support the AVCHD.
devices that support the AVCHD.
MENU
LSQT1093ENG.book 87 ページ ２００７年１月１５日 月曜日 午前９時２３分