Panasonic HDC-HS300P/PC User Manual

VQT1Z09

 The shutter speed is 1/2 or more.

 The flash is set to [ON].

 Using a tripod is recommended.

Interval recording:
 Still picture recording cannot be used.

 Recording mode cannot be changed when the 

interval recording is set.

 If you turn off the power or change the mode to 

, this function is canceled.

 1 second of motion picture is recorded even if 

24 frames are not recorded at the end of 
recording.

 Color balance and focus may not be adjusted 

automatically depending on light sources or 
scenes. If so, manually adjust these settings. 
(

F 83, 85)

Digital cinema:
 Motion pictures recorded while this setting is 

turned [ON] may not be played back properly 
with a player that cannot support 24p video 
signal playback.

Relay recording:
 It does not allow the relay recording of still 

pictures. However, even still pictures are 
recorded to the SD card after relay recording.

 is displayed on the thumbnail display 

during the playback of a scene that was relay 
recorded on the built-in memory.

Auto Ground-Directional Standby
 The AGS function may activate and cause the 

unit to pause the recording if you are recording 
a subject right above or right below you.

Auto slow shutter:
 When the shutter speed becomes 1/30, the 

screen may be seen as if frames are missed 
and afterimages may appear.

Digital cinema color:
 When motion pictures recorded while this 

 To play back images recorded in Digital cinema 

color with vivid colors of wider color ranges, a 
device compatible with x.v.Color

™

 is required. 

When these images are played back with 
devices other than ones compatible with 
x.v.Color

™

, it is recommended to record the 

images after this function is turned [OFF].

 x.v.Color

™

 is a name for devices that are 

compatible with the xvYCC format, an 
international standard for expanded color in 
motion pictures, and that follow the rules for 
signal transmission.

Wind noise reduction:
 When the Intelligent Auto Mode is set to on, 

[WIND CUT] is set to [ON], and the setting 
cannot be changed.

 The sound quality may be changed if this 

function is activated in strong winds.

 If wind sound cannot be reduced with the wind 

noise reduction function alone, set [BASS 
SETTING] to [LOWCUT]. (

F 76)

Microphone setup:
 If you wish to record higher quality sound and 

maintain realism even when zooming in, for 
instance, when recording a music recital, we 
recommend setting [MIC SETUP] to 
[SURROUND].

Microphone level:
 When the Intelligent Auto Mode is on, the 

setting is fixed to [AUTO] and cannot be 
changed.

 When [MIC SETUP] is [ZOOM MIC], the 

volume will be different depending on the zoom 
rate.

 Audio becomes stereo (2 ch) when input is 

from an external microphone, and the front left 
and front right gain values only work.

 The microphone input level meter shows the 

largest volume for the microphones.

 You cannot record with the audio completely 

muted.

Luminance:
 Luminance is displayed while adjusting [IRIS] 

even if [DISPLAY] is set to [OFF].

Histogram:
 Histogram is displayed while adjusting [IRIS] 

even if [DISPLAY] is set to [OFF].