Panasonic AG-HPX370P User Manual
100
Chapter
5
Prepar
ation
White Shading Compensation
The camera can use DEFAULT (fixed value) and three user
adjustable functions (USER1, USER2, USER3) to store
white shading compensation data.
Select SHADING SELECT in the setting menu LENS SETUP
screen to set compensation data. Selecting OFF turns off
shading compensation.
adjustable functions (USER1, USER2, USER3) to store
white shading compensation data.
Select SHADING SELECT in the setting menu LENS SETUP
screen to set compensation data. Selecting OFF turns off
shading compensation.
NOTE
If white shading adjustments are made while the video image
is distorted due to GENLOCK, the adjustments may not be
correct. Wait for the video image to return to normal before
performing white shading adjustments again.
is distorted due to GENLOCK, the adjustments may not be
correct. Wait for the video image to return to normal before
performing white shading adjustments again.
Selecting White Shading Compensation
Data
Data
1
SelectSHADINGSELECTinLENSSETUP,
thenpresstheJOGdialbutton.
thenpresstheJOGdialbutton.
For details on menu operation, refer to [Using the
menus] (page 129).
menus] (page 129).
PUSH MENU TO RETURN
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
DEFAULT
>>>
ON
>>>
>>>
IRIS ADJUST
>>>
>>>
>>>
SHADING SELECT
LENS SETUP
2
UsetheJOGdialbuttontoselectDEFAULT,
USER1,USER,USERorOFFandpressthe
JOGdialbutton.
USER1,USER,USERorOFFandpressthe
JOGdialbutton.
• To adjust the white shading, select USER1, USER2
or USER3.
• The USER1, USER2 or USER3 settings do not
contain any compensation data by default.
• DEFAULT stores compensation data that suits
XT17x4.5BRM-K14. For lenses other than those
above, perform the “White Shading Adjustment”
described below.
above, perform the “White Shading Adjustment”
described below.
PUSH MENU TO RETURN
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
DEFAULT
USER1
USER2
USER3
OFF
IRIS ADJUST
>>>
>>>
>>>
SHADING SELECT
LENS SETUP
White Shading Adjustment
NOTE
Coloring may occur in the vertical direction near the open
setting of the lens iris even when the white shading has been
adjusted. This is an optical characteristic and not indicative of
a failure.
setting of the lens iris even when the white shading has been
adjusted. This is an optical characteristic and not indicative of
a failure.
1
Placethecameraintheadjustmentmode.
(1) Mount a lens on the camera.
• Do not forget to connect the lens cable.
(2) Turn the shutter switch off and set 0 dB gain.
(3) If the lens comes with an extender, disengage it.
(4) Open the setting menu LENS SETUP screen
(3) If the lens comes with an extender, disengage it.
(4) Open the setting menu LENS SETUP screen
and select USER1, USER2 or USER3 under
SHADING SELECT.
SHADING SELECT.
(5) Use the JOG dial button to select SHADING
(USER), select EXECUTE and press the JOG dial
button.
button.
• The message “CHECK LUMINANCE LEVEL
ZEBRA ON VF” appears.
PUSH MENU TO RETURN
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
USER1
RETURN
EXECUTE
>>>
>>>
IRIS ADJUST
>>>
>>>
>>>
SHADING SELECT
LENS SETUP
YES
NO
CHECK LUMINANCE LEVEL
PUSH SET
ZEBRA ON VF
SHADING: USER1 SET OK?