Panasonic AG-HPX370P User Manual

147

Chapter

Men
uOper

ations

OTHER FUNCTIONS screen

Item

Setting

Notes

USER FILE

Saves user files to camera memory, loads them into
camera memory or initializes them. (For details, refer
to page 89.)
LOAD, SAVE, INITIAL
• This does not affect options in the SCENE FILE

screen.

• Not available in the following

conditions.

- When USB DEVICE mode is

enabled.

- When compiling to a clip in one-clip

recording mode.

1394 CONTROL

Selects the method the camera uses for controlling
external devices connected to the DVCPRO/DV
connector. (For details, refer to page 155.)
EXT:

Controls only the external device, but does not

transfer data to the camera for recording.
BOTH:

Controls both the external device and the

camera, and also records.
CHAIN:

When there is no more space left for recording

in the camera, recording is automatically made to the
external device.
OFF:

No control

• Not available in AVC-Intra mode and

DVCPRO HD native mode.

• Not available during interval, one-shot

and loop recording.

1394 CMD SEL

Determines how recording is stopped when the
camera controls an external device connected to the
DVCPRO/DV connector.
REC_P:

Engages REC/PAUSE status.

STOP:

Stops recording.

• Not available in AVC-Intra mode and

DVCPRO HD native mode.

• Not available during interval, one-shot

and loop recording.

ACCESS LED

Determines whether or not the P2 CARD ACCESS LED
should light.
ON, OFF

ALARM

Sets the alarm sound output when an alarm occurs.
HIGH, LOW, OFF

CLOCK SETTING

Sets the internal calendar (date)
For details, see [Setting Date and Time of Internal
Clock] (page 29).

TIME ZONE

Sets the time difference relative to Greenwich Mean
Time (GMT).
–12:00 ... 0:00 ... +13:00
For details, see [Setting Date and Time of Internal
Clock] (page 29).

• This setting cannot be initialized by

performing the MENU INIT option and
the INITIAL option in USER FILE.

GL PHASE

Selects the output signal whose phase is locked to
the signal input to the GENLOCK IN connector in HD
(1080i, 720P) mode. (For details, refer to page 73.)
HD SDI:

The HD SDI is locked to the genlock input.

COMPOSITE:

The down-converted composite signal

(VIDEO OUT or SDI OUT 480i (576i) signal) is locked
to the genlock input.

• Not available when SYSTEM MODE is

set to 480-59.94i (576-50i).

H PHASE

Adjusts the horizontal phase when phase is locked to
the signal input to the GENLOCK IN connector.
–512 ... 0 ... +511

• Hold down the JOG dial button and

turn it downwards or upwards and
maintain this position to quickly
change values.

SEEK SELECT

Selects the position that is cued up when the FF or
REW button is pressed while playback is paused.
CLIP:

Start point of clips

CLIP&T:

Start point of clips and text memo add points

MENU INIT

Restores all setting menu values including all scene
files (F1 to F6) and the user file to their factory
defaults.