Panasonic AG-HPX600EN User Manual

– 126 –

WFM

Selects the type of waveform to be displayed on the viewfinder screen when the 

<USER> buttons (<USER MAIN>/<USER1>/<USER2>) to which the waveform 

monitor function is assigned is pressed.
[WAVE]

Displays as a waveform.

Displays as a vector.

Changes display in order of [OFF] → [WAVE] → [VECTOR] → 

[OFF] each time the button is pressed.

AUTO KNEE SW

Selects the function for the <OUTPUT>/<AUTO KNEE> selector switch.

 

f

When 1080i and progressive mode are set, the 

dynamic range stretcher function is not activated 

even if [DRS] is selected, and the auto knee 

function activated when [ON] is selected operates.

 

f

When the dynamic range stretcher function is 

activated, the digital zoom function is disabled.

Activates the dynamic range stretcher function when the 

<AUTO KNEE> selector switch is set to <ON>. (page 13)

Activates the auto knee function when the <AUTO KNEE> 

selector switch is set to <ON>.

Does not activate the auto knee function when the <AUTO 

KNEE> selector switch is set to <ON>.

         indicates factory setting values.

REC FUNCTION

 

f

This setting is not available in the following cases:
-  The [REC SIGNAL] item is set to [SDI IN].

-  Native recording is set with the [REC FORMAT] 

item.

-  The [SYSTEM MODE] item is set to 

[1080-59.94i] or [480-59.94i], and the [CAMERA 

MODE] item is set to [24P] or [24PA].

-  Clip connection is underway with one-clip 

recording.

-  The [VFR] item is set to [ON].

Does not perform special recording.

Sets interval recording.

Sets one-shot recording.

Sets loop recording.

 

f

It is always set to [NORMAL] when the power is turned on.

ONE SHOT TIME

 

f

This setting is available only when the [REC 

FUNCTION] item is set to [ONE SHOT].

INTERVAL TIME

 

f

This setting is available only when the [REC 

FUNCTION] item is set to [INTERVAL].

START DELAY

Delays the start of interval recording and one-shot recording approximately one 

second.

 

f

This setting is available only when the [REC 

FUNCTION] item is set to [INTERVAL] or [ONE 

SHOT].

PREREC MODE

 

f

This setting is not available in the following cases:
-  The [REC SIGNAL] item is [SDI IN].

-  The [VFR] item is set to [ON].

Excluding the case when the frame rate and 

the number of frames of recording playback are 

matched (30P:30PN, 25P:25PN, 24P:24PN)

-  The [REC FUNCTION] item is set to other than 

[NORMAL].

ONE CLIP REC

 

f

This setting is not available in the following cases:
-  The [REC FUNCTION] item is other than 

[NORMAL].

-  The [REC SIGNAL] item is [SDI IN].

-  The [VFR] item is [ON].

Excluding the case when the frame rate and 

the number of frames of recording playback are 

matched (30P:30PN, 25P:25PN, 24P:24PN)

START TEXT MEMO

Sets the function that automatically adds a text memo at recording start position 

each time recording is started.

 

f

This setting is not available when the [REC 

FUNCTION] item is other than [NORMAL].

 

f

Text memos added when the [START TEXT 

MEMO] item is [ON] indicate recording start 

position.
To record text memos as character information, 

TC MODE

Sets count compensation for the built-in time code generator of the camera. 

 

f

This setting is not available when activating in 

[24P], [24PA], or [24PN]. Counting is always 

performed in the non-drop frame mode.

Counts in drop frame mode.

Counts in non-drop frame mode.

UB MODE

         indicates factory setting values.