Panasonic AG-HPX600EN User Manual

– 132 –

FB ADJUST

Adjusts the lens flange back.

 

f

This can be adjusted when an auto-focus 

compatible lens is attached.

         indicates factory setting values.

Available when the video encoder board (extra-cost option) is mounted. Items are grayed out and cannot be selected when the board is not mounted.

REC MEDIA (OP1)

Selects media for recording proxy data.

 

f

This setting is not available in the following cases:
-  Clip connection is underway with one-clip 

recording.

-  The [REC FUNCTION] item is set to other than 

[NORMAL].

-  The [VFR] item is set to [ON].

Excluding the case when the frame rate and 

the number of frames of recording playback are 

matched (30P:30PN, 25P:25PN, 24P:24PN)

Records the proxy data to the P2 card.

Records proxy data in both the P2 card and SD memory card.

Does not record proxy data.

REC MODE (1080) 

(OP1)

Sets the proxy data recording mode when the 1080 mode is selected.

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

REC MODE (720) 

(OP1)

Sets the proxy data recording mode when the 720P mode is selected.

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

REC MODE (SD) 

(OP1)

Sets the proxy data recording mode only when SD mode is selected.

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

TC SUPER (OP3)

Sets superimposition of time code display on proxy data recorded images.

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

Superimposes time code on the upper area of recorded images.

Superimposes time code on the lower area of recorded images.

Does not superimpose time code on recorded images.

STREAMING MODE 

(OP1), (OP3)

Selects the proxy streaming function.

 

f

In the following cases, proxy streaming function 

is not activated even if set this item to [RTP] or 

[HTTP].
-  The [P2 BROWSE] item is [OFF].

-  The [REC MODE] item for proxy is neither [HQ 

2CH MOV] nor [LOW 2CH MOV].

-  Proxy recording is set to be performed (the 

[REC MEDIA] item is [P2] or [P2&SD]), and the 

[PREREC MODE] item is set to [ON].

 

f

If the proxy streaming function is not activated, 

[STREAMING ERROR! SEE MODE CHECK 

DISPLAY] is displayed at the bottom of the 

viewfinder screen.
The status can be checked by closing the menu 

screen and pushing the <DISP/MODE CHK> 

switch towards the <CHK> side twice to display 

the [PROXY/NETWORK] screen of the mode 

check.

Stops the proxy streaming function.

Selects the RTP method.

Selects the HTTP live streaming method.

         indicates factory setting values.

PC MODE SEL

Sets the operation mode of the camera when the [PC MODE] item is set to [ON], 

and external devices (such as a hard disk drive and a computer) are connected 

with USB 2.0.

 

f

This setting is not available when the [PC MODE] 

item is set to [ON].

Selects the mode when using a hard disk drive by connecting to 

the camera with USB 2.0.

[USB DEVICE] Selects the mode when connecting the camera to a computer 

with USB 2.0, and using the P2 card as a mass storage. 

PC MODE

Operates the camera in the mode selected at the [PC MODE SEL] item.

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

Operates in [PC MODE].

Stops [PC MODE] and returns to normal operation.

 

f

It is always set to [OFF] when the power is turned on.

NETWORK SEL 

(OP3)

Sets the connection method when making network connection between external 

devices (such as a computer) and the camera.

 

f

If [PC MODE] is set to [ON] when OP3 is installed, 

the selected item is displayed in blue and cannot 

be set.

Connects with wireless LAN.

Connects with the <LAN> terminal.

         indicates factory setting values.