Panasonic AG-HPX600EN User Manual
– 163 –
Chapter 11 Additional Functions from the Optional Board — Video encoder board (AG-YDX600G)
Recording modes and recording signals (video/audio)
Recording mode
File format
Video
Audio
Resolution
Codec
Frame
rate
Bit rate
Codec
Number of
channels
Bit rate per
channel
Sampling
frequency
STD 2CH MP4
MP4
320×240
(QVGA)
MPEG-4
Simple Profile
30 fps/
24 fps/
25 fps
1500 kbps
AAC-LC
2ch
64 kbps
24 kHz
SHQ 2CH MOV
MOV
960×540
H.264
High Profile
30 fps/
24 fps/
25 fps
3500 kbps
LPCM
2ch
768 bps
48 kHz
HQ 4CH MOV
MOV
640×360
H.264
High Profile
30 fps/
24 fps/
25 fps
1500 kbps
AAC-LC
4ch
64 kbps
48 kHz
HQ 2CH MOV
MOV
640×360
H.264
High Profile
30 fps/
24 fps/
25 fps
1500 kbps
AAC-LC
2ch
64 kbps
48 kHz
LOW 2CH MOV*
MOV
1080i mode
480×270
352×240
(SIF_NTSC)
576-50i mode
352×288
(SIF_PAL)
H.264
Baseline
Profile
30 fps/
24 fps/
25 fps
800 kbps
AAC-LC
2ch
64 kbps
48 kHz
* In the 720P mode, [LOW 2CH MOV] cannot be set.
Recording the proxy data
Set the [REC MEDIA] item to [P2] or [P2&SD] and press the <REC> button to start proxy recording at the same time as recording of the sources.
Push the <DISP/MODE CHK> switch towards the <CHK> side twice to display the proxy data recording information on the viewfinder screen.
Push the <DISP/MODE CHK> switch towards the <CHK> side twice to display the proxy data recording information on the viewfinder screen.
Recording to the SD memory card
To record the proxy data, use Panasonic SD or SDHC memory cards with an indication of class 2 or higher. Refer to our support page at the following
website for the latest information not included in these operating instructions.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.
website for the latest information not included in these operating instructions.
http://pro-av.panasonic.net/
When recording the proxy data to an SD memory card, always format the card using the camera.
Checking the SD memory card
1
Insert the SD memory card into the camera.
2
Press the <THUMBNAIL> button to display the thumbnail
screen.
3
Press the <THUMBNAIL MENU> button.
4
Use the cursor buttons and the <SET> button to select
[PROPERTY] → [DEVICES] → [SD CARD].
f
The format status is displayed in the [SD STANDARD] item.
If [NOT SUPPORTED] is displayed, format the card with the
camera.
If [NOT SUPPORTED] is displayed, format the card with the
camera.