Panasonic AG-HPX600EN User Manual
– 29 –
Chapter 2 Description of Parts — SmartUI display ([HOME] screen)
SmartUI display ([HOME] screen)
TC
NDF SLAVE P -REC
1
2
MEDIA
E
F
BATT
E
F
CH1
CH2
A
3
1
4
6
5
2
1 Media remaining space indicator bar
Indicates the remaining free space in the P2 card using a 7-segment
display.
Each segment is equivalent to three minutes, and the decreasing
P2 card remaining time is indicated by the segments going out one
segment at a time.
display.
Each segment is equivalent to three minutes, and the decreasing
P2 card remaining time is indicated by the segments going out one
segment at a time.
2 Battery charge level indicator bar
When a battery with a digital indication (% indication) is used, all
seven segments up to the F position light if the battery charge level is
70% or higher.
When the battery charge level falls below 70%, the segments go out
one by one for each 10% drop.
seven segments up to the F position light if the battery charge level is
70% or higher.
When the battery charge level falls below 70%, the segments go out
one by one for each 10% drop.
3 Audio channel level meter
One segment indicates 2 dB increment, with the smallest indication
being −36 dB and the [OVER] indication displayed by ( at the
topmost position.
Each time you press the <MONITOR SEL> button, CH1/CH2, stereo,
CH3/CH4 are switched, and the channel display of the level meter is
switched together. (page 141)
Channels output to the monitor audio are displayed in white dropout.
When the stereo is selected, both channels are displayed in white
dropout.
being −36 dB and the [OVER] indication displayed by ( at the
topmost position.
Each time you press the <MONITOR SEL> button, CH1/CH2, stereo,
CH3/CH4 are switched, and the channel display of the level meter is
switched together. (page 141)
Channels output to the monitor audio are displayed in white dropout.
When the stereo is selected, both channels are displayed in white
dropout.
4 Time code indications
Each time you press the <COUNTER> button, the display changes in
the order of [CLIP] → [TC] → [tc] → [UB] → [FR] → [CLIP] (viewfinder
screen not displayed)* → [CLIP].
the order of [CLIP] → [TC] → [tc] → [UB] → [FR] → [CLIP] (viewfinder
screen not displayed)* → [CLIP].
* The time code on the viewfinder screen is hidden.
[CLIP]
Indicates the counter value in
hours:minutes:seconds.
[TC]
Indicates the time code value in
hours:minutes:seconds:frames.
[tc]
Indicates the time code value in
hours:minutes:seconds:frames. The frame is
displayed after converting the frame digit to 24
frames.
[UB]
Indicates the user bits value.
[FR]
Indicates the information of the frame rate at
which recording is performed.
[60I]
[60I]
60i interlace mode (60 fields/sec)
[60P]
60P progressive mode (60 frames/
sec)
[30P]
30P progressive mode (30 frames/
sec)
[24P]*
24P progressive mode (24 frames/
sec)
[24PA]*
24P advance mode (24 frames/sec)
[50I]
50i interlace mode (50 fields/sec)
[50P]
50P progressive mode (50 frames/
sec)
[25P]
25P progressive mode (25 frames/
sec)
* In the case of 24P and 24PA, the sequence
number is indicated.
[NDF]
Indicated when the time code is in the non-drop
frame mode.
[DF]
Indicated when the time code is in the drop
frame mode.
[HOLD]
Indicated when the time code generator/read
value is held.
[F-RUN]
Indicated when the time code is set to advance
continuously regardless of the recording
operation.
[R-RUN]
Indicated when the time code is set to advance
only during recording.
[SLAVE]
Indicated when the time code is externally
locked.
5 Recording mode display
[REC]
Standard recording
[P-REC]
When pre-recording mode is set
[i-REC]
Interval recording setting
[L-REC]
Loop recording setting
6 Status information
Audio level display
Indicates whether audio CH1/CH3 or CH2/CH4
audio volume and audio level are in the auto
adjustment mode. In the auto adjustment mode,
[A] is displayed.
Audio input
Indicates the input settings of audio CH1, CH2,
CH3, and CH4.
At a USB connection Indicated when the [PC MODE] item on the
setting menu [PC/USB/LAN] screen is set to
[ON], and a device selected at [PC MODE SEL]
is connected.
f
In the USB host mode: [USB
HOST CONNECTED]/[USB HOST
DISCONNECTED]
f
In the USB device mode: [USB
DEVICE CONNECTED]/[USB DEVICE
DISCONNECTED]
Error, card warning
display
Indicates the error code when something has
caused an error on the camera.