Panasonic AG-HPX600EN User Manual

– 95 –

 

f

The [CHECK LUMINANCE LEVEL ZEBRA ON EVF] message 
appears.

PUSH  MENU  TO  RETURN 

LENS SETUP

SHADING SELECT

SHADING(USER)

CAC

CAC PROPERTY

CAC CARD READ

CAC FILE DELETE

CAC FILE INIT

IRIS GAIN

PUSH  MENU  TO  RETURN

USER1

RETURN

EXECUTE

>>>

>>>

>>>

>>>

LENS

CHECK LUMINANCE LEVEL

ZEBRA ON EVF

SHADING: USER1 SET OK?

YES

NO

PUSH SET

1)  Shoot a white sheet of paper with no unevenness of color for the 

whole screen.

2)  Set the lens aperture control to manual, and adjust it so that the 

zebra pattern covers the whole viewfinder screen.

 

f

Adjust the position of the lighting because the zebra pattern will 
not cover the whole screen if there is any unevenness in the 
lighting.

 

f

Make adjustments to avoid several light sources of different color 
temperature (e.g. fluorescent lights and halogen lamp) from 
illuminating on the white paper.

CHECK LUMINANCE LEVEL

ZEBRA ON EVF

SHADING: USER1 SET OK?

YES

NO

PUSH SET

@

@

 tSince fluorescent lights, mercury lamps, and other such kinds of 

lighting tend to flicker, use a light source which is less subject to 

flickering such as sunlight or a halogen lamp.

 tMake adjustments to the position of the lighting, etc. also when 

the lens aperture is not between F4 and F11.

 tMake sure to leave the shutter switch at OFF.

1)  Set the <WHITE BAL> switch to <A> or <B>, and use the <AUTO 

W/B BAL> switch to perform automatic white balance adjustment 
(AWB).

2)  Perform automatic black balance adjustment (ABB) with the 

<AUTO W/B BAL> switch.

3)  Use the <AUTO W/B BAL> switch to perform automatic white 

balance adjustment (AWB) again.

Perform step 2-2) again.

1)  Select [YES], and press the jog dial button.

2)  The [SHADING ACTIVE] message appears on the screen during 

the adjustment.

3)  When the adjustment is complete after a few seconds, the 

[SHADING OK] message appears.

 

f

If an error message such as [SHADING NG LEVEL OVER] or 
[SHADING NG LOW LIGHT] appears, readjust the aperture.

 

f

The adjusted value is automatically stored in the set memory 
[USER1], [USER2], or [USER3].

In this case, white shading does not need to be adjusted again with 
the extender function released.

The chromatic aberration compensation function is a function to automatically compensate for registration error that is caused mainly due to slight 
chromatic aberration, which is hard to completely compensate with the lens itself, using the camera recorder unit, and to minimize lateral chromatic 
aberration of surrounding image.
When the lens compatible with the chromatic aberration compensation function is mounted, if the camera has the chromatic aberration compensation 
data of the lens, then the chromatic aberration compensation function is activated automatically.

@

@

 tIn the menu, representative lens model numbers are displayed.

 tThe chromatic aberration compensation function of the camera is effective only in the horizontal direction.

 tThe chromatic aberration compensation function does not operate in +18 dB.

 tWhen the lens is for macro shooting, the chromatic aberration compensation function may not operate correctly.

 tFor addition or change in compatible lenses after release of the camera, visit the support desk at the following website:

http://pro-av.panasonic.net/

The chromatic aberration compensation function is operating if [CAC] is displayed on the upper right of the mode check screen while the menu is not 
displayed.