Panasonic HDC-HS9PC User Manual
12
VQT1N74
Quick Guide
∫ Charging the battery
1
Connect the AC cable to the AC adaptor
and the AC outlet.
and the AC outlet.
2
Insert the battery into the battery charger
by aligning the arrows.
by aligning the arrows.
∫ Inserting the battery
Open the LCD monitor and install
the battery by inserting it in the
direction shown in the figure.
Open the LCD monitor and install
the battery by inserting it in the
direction shown in the figure.
A Insert the battery until it clicks and locks.
∫ How to turn on the power
Turn on the power by turning the
mode dial to
Turn on the power by turning the
mode dial to
,
or
while
pressing the lock release button
A.
≥ Rotate the mode dial while at the same time
pressing in the lock release button if changing
from OFF to another mode.
from OFF to another mode.
≥ Status indicator B
≥ Align with the mark C.
≥ To turn off the power, set the mode dial to OFF.
≥ Align with the mark C.
≥ To turn off the power, set the mode dial to OFF.
∫ Inserting/removing an SD card
1
Set the mode dial to OFF.
2
Open the SD card cover while sliding the
SD CARD OPEN lever
SD CARD OPEN lever
B.
3
Insert/remove the SD card.
≥ When inserting an SD card, face the terminal
side
C in the direction shown in the illustration
and press it straight in as far as it will go.
≥ When removing the SD card, press the center
of the SD card and then pull it straight out.
4
Securely close the SD card cover.
≥ Securely close it until it clicks.
∫ Language selection
1) Press the MENU button, then select
[LANGUAGE] and press the cursor button.
2) Select [English] and press the cursor button.
Charging lamp
[CHARGE]
[CHARGE]
A
Lights up:
Charging
Goes off:
Charging
completed
Charging
Goes off:
Charging
completed
Card access lamp [ACCESS]
≥ When this unit is processing data, the
access lamp
A lights up.
HDCHS9P-VQT1N74_ENG.book 12 ページ ２００７年１２月２５日 火曜日 午後８時４３分