Panasonic HDC-HS100P User Manual

Page of 160
22
VQT1T93
Setup
1
Power supply
∫ About batteries that you can use with this unit
The Panasonic battery that can be used with this unit is VW-VBG130/VW-VBG260/VW-VBG6.
VW-VBG130/VW-VBG260/VW-VBG6 come with a function to check whether the battery and unit can 
be safely used together.
≥ To use the VW-VBG6 for this unit, the battery pack holder kit VW-VH04 (optional) is required.
Important:
If the DC cable is connected to the AC adaptor, then the battery will not charge. Remove the DC 
cable from the AC adaptor.
1
Connect the AC cable to the AC adaptor and the AC outlet.
2
Insert the battery into the battery charger by aligning the arrows.
It has been found that counterfeit battery packs which look very similar to the genuine product are 
made available to purchase in some markets. Some of these battery packs are not adequately 
protected with internal protection to meet the requirements of appropriate safety standards. There is 
a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not 
liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure 
that safe products are used we would recommend that a genuine Panasonic battery pack is used.
≥ Be aware that many batteries sold at extremely cheap prices or in situations where it is difficult to 
verify the actual products before purchase have proven to be counterfeit.
Charging the battery
When this unit is purchased, the battery is not charged. Charge the battery before using this 
unit.
Charging lamp [CHARGE] A
Lights up:
Charging (Battery charging time: l 24)
Goes off:
Charging completed
Flashing:
Make sure that the terminals of the battery or the 
AC adaptor are not exposed to dirt, foreign 
objects or dust, then reconnect them properly. 
(l 141)
HDCHS100P-VQT1T93_ENG.book  22 ページ  2008年7月14日 月曜日 午後1時36分