Panasonic AG-HMC151E User Manual
86
Setup menu list
When the settings are changed using the SYSTEM FREQ item (Page 99) on the OTHER FUNCTIONS
screen, whatever has been set for SYNCRO SCAN (See below), REC FORMAT (Page 91), HDMI OUT
SEL, and CMPNT OUT SEL (Page 93) will be changed to the initial setting.
screen, whatever has been set for SYNCRO SCAN (See below), REC FORMAT (Page 91), HDMI OUT
SEL, and CMPNT OUT SEL (Page 93) will be changed to the initial setting.
SCENE FILE screen
Item
Display
mode
Description of settings
CARD READ/
WRITE
WRITE
(Camera)
Reads and writes scene files on the SD Memory Card.
READ:
READ:
Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card
after setting values are selected.
after setting values are selected.
WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the
SD Memory Card.
NO:
Returns to the last screen.
LOAD/SAVE/
INIT
INIT
(Camera)
LOAD: Loads the scene file settings which is saved by this camera.
SAVE: Saves the changed scene file settings.
INITIALIZE:
SAVE: Saves the changed scene file settings.
INITIALIZE:
The settings of the scene file selected with the SCENE FILE dial
are returned to the factory settings.
are returned to the factory settings.
NO:
Returns to the last screen.
SYNCRO
SCAN
SCAN
(Camera)
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the Operation lever toward the or will cause the values to change at
a faster rate.
When SYSTEM FREQ is set to 50 Hz
screen, etc.
Holding the Operation lever toward the or will cause the values to change at
a faster rate.
When SYSTEM FREQ is set to 50 Hz
50P/50i:
1/50.0 … 1/248.9
(Factory default setting is 1/48.0.)
(Factory default setting is 1/48.0.)
25P:
1/25.0 … 1/48.0 … 1/248.9
•
•
When SYSTEM FREQ is set to 59.9 Hz
60P/60i:
1/60.0…1/249.8
(Factory default setting is 1/48.0.)
(Factory default setting is 1/48.0.)
30P:
1/30.0…1/48.0…1/249.8
24P:
1/24.0…1/48.0…1/249.8
•
•
•
DETAIL LEVEL (Camera)
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7…0…+ 7
directions).
- 7…0…+ 7
V DETAIL
LEVEL
LEVEL
(Camera)
Adjusts the level of outline correction in the vertical direction.
- 7…0…+ 7
- 7…0…+ 7
DETAIL
CORING
CORING
(Camera)
Adjusts the level of noise reduction of the detail signal.
- 7…0…+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
- 7…0…+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
CHROMA
LEVEL
LEVEL
(Camera)
Adjusts the chroma level.
- 7…0…+ 7
- 7…0…+ 7
CHROMA
PHASE
PHASE
(Camera)
Makes fine adjustments to the chroma phase.
- 7…0…+ 7
- 7…0…+ 7
COLOR TEMP
Ach
Ach
(Camera)
Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
- 7…0…+ 7
adjustment).
- 7…0…+ 7
COLOR TEMP
Bch
Bch
(Camera)
Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
- 7…0…+ 7
adjustment).
- 7…0…+ 7
MASTER PED
(Camera)
Adjusts the master pedestal (black level of the image) as the basis for images.
- 100…0…+ 100
- 100…0…+ 100
A.IRIS LEVEL
(Camera)
Sets the desired AUTO IRIS level.
- 10…0…+ 10
- 10…0…+ 10
indicates the factory setting.