Panasonic AG-HMC151E User Manual

92

TC MODE
(This item is not 
displayed on 
the menu when 
SYSTEM FREQ 
is set to 50 Hz.)

Selects the correction mode of the internal time code generator when the time 
code of the internal time code generator is recorded.
DF:  

Uses the drop frame mode.

Uses the non-drop frame mode.

TC MODE is automatically set to NDF when you set recording frame rate of 
recording format to 24P. (Only when SYSTEM FREQ is set to 59.9 Hz)

•

Sets the mode in which you advance the internal time code generator.
FREE RUN:   The time code is advanced regardless of the operation mode.

A slight time error may occur when switching to PB mode if the 
frame rate is set to 24P. (Only when SYSTEM FREQ is set to 
59.9 Hz)

REC RUN:  The time code is advanced only when recording.

Sets the initial time code. 
YES  NO

Set the frame value to 0 or a multiple of 4 when you set recording frame rate 
of recording format to 24P. If any other value is set, the recorded time code will 
mis-match. (Only when SYSTEM FREQ is set to 59.9 Hz)

•

Sets the user information. 
YES  NO

Synchronizes the initial time code value during multi-camera shooting. (Slave 
camera time codes are synchronized to the master internal TCG value.) 
(Page 55)
MASTER:  Sets the mode to master mode. 
SLAVE:   Sets the mode to slave mode. 

When the COUNTER - RESET/TC SET button is pressed, input time 
codes are synchronized to the internal TCG. 

Returns to the last screen.

Master and slave mode settings are only in effect when this menu is open. 
When the menu is closed, EXT TC LINK is automatically canceled.  

•

        indicates the factory setting.