Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 User Manual

Page of 205
- 105 -
Recording
Applicable modes: 
You can set the recording start time, the recording interval and the number of pictures, and 
automatically record subjects such as animals and plants as time elapses.
Set the date and time settings in advance. 
It cannot be recorded into the built-in memory. Please use a card.
∫ Set the recording time/interval/number of pictures
Press 2/1 to select the settings and press 3/4 to 
set.
Press [MENU/SET].
Press the shutter button fully.
When the recording time arrives, the recording starts automatically.
If the current time has already passed the set start time, the recording starts when the 
shutter button is pressed.
During recording standby, the power will turn off automatically if no operation is 
performed for a certain period. The Time Lapse Shot is continued even with the power 
turned off. When the recording start time arrives, the power turns on automatically. To 
turn on the power manually, press the camera [ON/OFF] button or press and hold [(].
To stop the Time Lapse Shooting partway through, press [MENU/SET] or [(] and end 
the recording on the displayed confirmation screen.
[Time Lapse Shot]
Settings
Description of settings
Start time A
You can set the time to start recording. Any time up to 
12 hours ahead can be set.
Recording interval B
An interval of up to 30 minutes can be set in units of 
1 minute.
For certain shutter speed settings, the minimum interval is 
5 minutes.
Number of pictures C
10, 20, 30, 40, 50, 60
Recording warning D
[u]:
The user is notified that recording is to start by a 
warning sound and flashing AF assist lamp.
[s]:
There is no warning sound. Also, the AF assist 
lamp doesn’t flash.
A
B
D
C