Panasonic DMC-FT4/DMC-TS4 VQT4E30 F0212MG0 User Manual

Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.

Press 3/4 to select [PC], and then press [MENU/SET].

•

If [USB Mode] 

 is set to [PC] in the [Setup] menu in advance, the camera will be 

automatically connected to the PC without displaying the [USB Mode] selection screen.

•

When the camera has been connected to the PC with [USB Mode] set to 

[PictBridge(PTP)], a message may appear on the PC’s screen. Close the screen by 

selecting [Cancel], safely remove the USB connection cable 

, and set the 

[USB Mode] to [PC].

•

You can save the images into the PC by drag and drop the image or the folder with the 

image you would like to transfer onto the different folder in the PC.

•

Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 

power becomes low while the camera and the PC are communicating, the alarm beeps.

Refer to 

 before disconnecting the 

USB connection cable. Otherwise, data may be destroyed.

•

Before connecting or disconnecting the AC adaptor (optional), turn the camera off.

•

Before inserting or removing a card/battery, turn the camera off and disconnect the USB 

connection cable. Otherwise, data may be destroyed.

•

Check the directions of the connectors, and plug them straight in or unplug them 

straight out. (Otherwise the connectors may bend out of shape which will cause a 

malfunction.) Do not connect devices to incorrect terminals. Doing so may cause 

malfunction.

•

Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

A USB connection cable (supplied)
B Align the marks, and insert.

モヷチヰヶヵチバチュ

リヨ

リヵ

モ

ロ